Eagle CP40 Roll Bending Machine, Angle Roll, Roll Benders at Van Sant Enterprises, Inc.

Eagle CP40 Series Roll Bender
Flats 4 " / Tube 2-3/4" / Angle 2"
Rugged, Versatile and Highly Cost Effective.

CP40 - M

CP40-H

The Model CP40 is one of the most used Section Bender (angle roll) in the world. It is equipped with LED digital display to monitor the bending roll and aid in precise positioning for greater accuracy in rolling. The unit uses the Powerful Pyramid Geometry with lower rolls driven and fixed in position and the top roll adjustable to obtain different bending diameters. Universal tooling supplied in 18 components permit bending of most all standard sections.

STANDARD FEATURES

LED Digital Display to monitor top roll position
Shafts Heat Treated and precision and precision ground
Hardened Universal Rolls, New Design more versatile
Rugged Steel Heads, No Castings!
2.5 HP Bi-directional TEFC Motor
3 Way Adjustable Lateral Guides
All shafts Journaled in dual high load roller bearings
Automatic Top Roll Locking Pin for EASY tooling change out
Higher Rolling Speed & Heavier Machine Weights
Low Voltage Controls
Thermal Motor Overload Protection
Mobile Control Station w/ 40 memory presets
Unit operates in Vertical & Horizontal Positions

Be the first to review this product!

Optional Equipment

Rolls for round tube/pipe/rod, special sections & serial production requirements
Special Lateral Guides with adjustable cam rollers and anti-torsion supports for leg-in angles, Special Conical Rolls for angle rolling leg in or out
Special rolls for tight diameters
Variable speed optional on "H" versions
Bar Twisting Device - Scroll Bending Device

CP40-M* (Manual adjustment w/LED, foot pedals, 220v 3ph)	$11,400.00
CP40-H2* (Hydraulic adjustment, 2 Driven rolls, w/LED, foot pedals, 220v 3ph)	$13,600.00
CP40-H* (Hydraulic adjustment, 3 Driven rolls, w/LED, foot pedals, 220v 3ph)	$15,950.00
CP40-H-REV* (Above with Variable Speed, 220v 3ph)	$17,450.00

* This product ships via motor freight only. Shipping charges for this item will NOT be reflected in the shopping cart. You will be contacted with a shipping quote prior to shipment.

CAPACITY CHART

MATERIAL	CP-40M/40H/40H2
Flats, Hard	2-1/4 x 3/8 Ø 20"
Flats, Easy	4 x 5/8 Ø 16"
Square Bar	1-3/8 Ø 20"
Angle, Leg-out	2 x 1/4 Ø 24"
Angle, Leg-in	2 x 1/4 Ø 28"
Tee, Leg-out	2-1/2 Ø 24 "
Tee, Leg-in	2 Ø 24"
C, Leg-out	3 Ø 24"
C, Leg-in	3Ø 30"
Round Bar	1-3/8 Ø 20"
Pipe, Sch. 40	2 Ø 40"
Round Tube	2-3/4 x 14 ga Ø 60"
Square Tube	2 x 1/8 Ø 48"
Rect. Tube	2-1/4 x 1-1/2 x 1/8
Bending Adjustment	M-H-H2
Driven rolls	H=3, M=2, H2=2
Rolling speed fpm	14
Working plane	Vertical/Horizontal
Repeat control	Auto Repeat
Installed power HP	3.8
Approx. dimensions	28 x 38 x 54h
Approx. Shipping wt. lbs.	1450

Chart indicates minimum suggested inside bending diameters at maximum section size using mild steel - Specifications subject to change/modification without prior notice - Data is approximate - Contact your authorized dealer for specific tooling capabilities/requirements on shapes and sizes to be bent. Special rolls and/or tooling may be required for some angle, channel rolling and/or for serial production on some sections - Bending I.D.'s may be limited by predicted material distortion.