In-stock orders placed before 3 pm Central Time ship same day! Click here for details →
5/8 Fixture Table Clamps & Accessories
5/8 inch jig table clamps and accessories work with all Strong Hand BuildPro tables and are great for easy and repeatable fixturing for fabrication and welding. These accessories are based on a 5/8 inch diameter round hole pattern as found on all BuildPro and CertiFlat Welding Tables.
Narrow by Sub Category
Search Results
Searching...
Searching...BuildPro 5/8 Starter Pack, 16 piece
BEST SELLER
- Fits most fixture tables with 5/8 inch holes
- Heavy duty steel components
- Precision fit
- Great starter or add-on kit
Price: $279.90
BuildPro Swiveling Fixture Plate for Versa-Mount
NEW
- Quickly and easily swivels for welding convenience
- Nitrided plate resists welding spatter and slag
- Fits standard 2 inch receiver tubes
- Plate has 5/8 holes on 2 inch centers
Price: $348.90
BuildPro Magnetic T-Slot Single Hole Adapter
- For use with BuildPro Welding Tables
- Add additional mounting holes in table slots
Price: $14.60
BuildPro Magnetic T-Slot 2 Hole Adapter
- For use with BuildPro Welding Tables
- Add additional mounting holes in table slots
- Magnetic for quick and easy changes
Price: $21.90
BuildPro Heavy Duty V-Block, 120 Degree Angle
- For use with 5/8 BuildPro Welding Tables
- Holds up to 3 inch round material
Price: $31.40
BuildPro Heavy Duty V-Block, 150 Degree Angle
- For use with 5/8 BuildPro Welding Tables
- Holds up to 8 inch round material
Price: $34.00
BuildPro Bench Stone
NEW
- Great for maintaining fixture tables
- 100 and 400 grit
- Plastic holder with non-slip rubber
Price: $21.30
BuildPro 24 x 8 x 4 inch Riser Block with 5 Surfaces
NEW
- For use with BuildPro Welding Tables
- 5/8 inch fixture holes on 2 inch center
- 24 x 8 x 4 inches
Price: $1,140.00
BuildPro 36 x 8 x 4 inch Riser Block with 5 Surfaces
- For use with BuildPro Welding Tables
- 5/8 inch fixture holes on 2 inch center
- 36 x 8 x 4 inches
Price: $1,470.00
BuildPro Table Grounding Clamp
NEW
- Easy twist-lock connection
- For 5/8 or 16mm holes
- Fits up to 3/0 cables
Price: $47.50
BuildPro Tube and Pipe Notcher
- Attaches directly to fixture tables with 5/8 holes with 2 inch spacing
- 1 to 2-1/2 inch capacity
- Notches up to 50 degrees
- Offset notch capable
Price: $276.00
Adjustable Height Hitch Mount Vise Plate for Rhino Cart
NEW
- For use with Rhino Cart
- Fits most vises with a 3 or 4 bolt pattern
- Under table mount design
- Removable receiver hitch
Price: $229.00
BuildPro V-Block with 120 degree angle
- For use with BuildPro Welding Tables
- Holds up to 2-1/2 inch round stock
Price: $17.40
BuildPro V-Block Spacer
- For use with BuildPro Welding Tables
- Fits welding tables with 5/8 inch holes
Price: $4.38
BuildPro Aluminum V-Block with 120 degree angle
- For use with BuildPro Welding Tables
- Fits round stock up to 2-1/2 inches in diameter
- Aluminum construction
Price: $8.20
BuildPro Setup Cone for Round Tubing or Pipe
NEW
- For use with BuildPro Welding Tables
- Includes 5/8 inch locating post and locking pin
- Center 3/8 to 1-3/4 inch tubing
Price: $25.80
BuildPro Bend Rest with 120 degree angle - Small
NEW
- For use with BuildPro Welding Tables
- Supports round stock in bends and elbows
- Holds up to 2.5 inch OD tubing
Price: $14.00
BuildPro Bend Rest with 120 degree angle - Medium
NEW
- For use with BuildPro Welding Tables
- Supports round stock in bends and elbows
- Holds up to 3 inch OD tubing
Price: $14.60
BuildPro Bend Rest with 150 degree angle - Large
NEW
- For use with BuildPro Welding Tables
- Supports round stock in bends and elbows
- Holds up to 8 inch OD tubing
Price: $16.00
BuildPro Table Mount Clamp, 3 x 4 inch
- For use with BuildPro Welding Tables
- Removable 5/8 peg allows for many mounting options
- 3 inch reach
Price: $24.70
BuildPro Table Mount Clamp, 3-3/8 x 4 inch
- For use with BuildPro Welding Tables
- Removable 5/8 peg allows for many mounting options
- 3-3/8 inch reach
Price: $39.00
BuildPro Table Mount Clamp, 6-1/8 x 4-3/4 inch
BEST SELLER
- For use with BuildPro Welding Tables
- Removable 5/8 peg allows for many mounting options
- 6-1/8 inch reach
Price: $45.00
BuildPro V-Block with 90 degree angle
- For use with BuildPro Welding Tables
- Holds up to 2 inch diameter tubing
Price: $15.30
BuildPro Table Mount Clamp, 2 x 2-3/8 inch
- For use with BuildPro Welding Tables
- Removable 5/8 peg allows for many mounting options
- 2 inch reach
Price: $20.80
Searching...BuildPro 5/8 Starter Pack, 16 piece
BEST SELLER
- Fits most fixture tables with 5/8 inch holes
- Heavy duty steel components
- Precision fit
- Great starter or add-on kit
Price: $279.90
BuildPro Swiveling Fixture Plate for Versa-Mount
NEW
- Quickly and easily swivels for welding convenience
- Nitrided plate resists welding spatter and slag
- Fits standard 2 inch receiver tubes
- Plate has 5/8 holes on 2 inch centers
Price: $348.90
BuildPro Magnetic T-Slot Single Hole Adapter
- For use with BuildPro Welding Tables
- Add additional mounting holes in table slots
Price: $14.60
BuildPro Magnetic T-Slot 2 Hole Adapter
- For use with BuildPro Welding Tables
- Add additional mounting holes in table slots
- Magnetic for quick and easy changes
Price: $21.90
BuildPro Heavy Duty V-Block, 120 Degree Angle
- For use with 5/8 BuildPro Welding Tables
- Holds up to 3 inch round material
Price: $31.40
BuildPro Heavy Duty V-Block, 150 Degree Angle
- For use with 5/8 BuildPro Welding Tables
- Holds up to 8 inch round material
Price: $34.00
BuildPro Bench Stone
NEW
- Great for maintaining fixture tables
- 100 and 400 grit
- Plastic holder with non-slip rubber
Price: $21.30
BuildPro 24 x 8 x 4 inch Riser Block with 5 Surfaces
NEW
- For use with BuildPro Welding Tables
- 5/8 inch fixture holes on 2 inch center
- 24 x 8 x 4 inches
Price: $1,140.00
BuildPro 36 x 8 x 4 inch Riser Block with 5 Surfaces
- For use with BuildPro Welding Tables
- 5/8 inch fixture holes on 2 inch center
- 36 x 8 x 4 inches
Price: $1,470.00
BuildPro Table Grounding Clamp
NEW
- Easy twist-lock connection
- For 5/8 or 16mm holes
- Fits up to 3/0 cables
Price: $47.50
BuildPro Tube and Pipe Notcher
- Attaches directly to fixture tables with 5/8 holes with 2 inch spacing
- 1 to 2-1/2 inch capacity
- Notches up to 50 degrees
- Offset notch capable
Price: $276.00
Adjustable Height Hitch Mount Vise Plate for Rhino Cart
NEW
- For use with Rhino Cart
- Fits most vises with a 3 or 4 bolt pattern
- Under table mount design
- Removable receiver hitch
Price: $229.00
BuildPro V-Block with 120 degree angle
- For use with BuildPro Welding Tables
- Holds up to 2-1/2 inch round stock
Price: $17.40
BuildPro V-Block Spacer
- For use with BuildPro Welding Tables
- Fits welding tables with 5/8 inch holes
Price: $4.38
BuildPro Aluminum V-Block with 120 degree angle
- For use with BuildPro Welding Tables
- Fits round stock up to 2-1/2 inches in diameter
- Aluminum construction
Price: $8.20
BuildPro Setup Cone for Round Tubing or Pipe
NEW
- For use with BuildPro Welding Tables
- Includes 5/8 inch locating post and locking pin
- Center 3/8 to 1-3/4 inch tubing
Price: $25.80
BuildPro Bend Rest with 120 degree angle - Small
NEW
- For use with BuildPro Welding Tables
- Supports round stock in bends and elbows
- Holds up to 2.5 inch OD tubing
Price: $14.00
BuildPro Bend Rest with 120 degree angle - Medium
NEW
- For use with BuildPro Welding Tables
- Supports round stock in bends and elbows
- Holds up to 3 inch OD tubing
Price: $14.60
BuildPro Bend Rest with 150 degree angle - Large
NEW
- For use with BuildPro Welding Tables
- Supports round stock in bends and elbows
- Holds up to 8 inch OD tubing
Price: $16.00
BuildPro Table Mount Clamp, 3 x 4 inch
- For use with BuildPro Welding Tables
- Removable 5/8 peg allows for many mounting options
- 3 inch reach
Price: $24.70
BuildPro Table Mount Clamp, 3-3/8 x 4 inch
- For use with BuildPro Welding Tables
- Removable 5/8 peg allows for many mounting options
- 3-3/8 inch reach
Price: $39.00
BuildPro Table Mount Clamp, 6-1/8 x 4-3/4 inch
BEST SELLER
- For use with BuildPro Welding Tables
- Removable 5/8 peg allows for many mounting options
- 6-1/8 inch reach
Price: $45.00
BuildPro V-Block with 90 degree angle
- For use with BuildPro Welding Tables
- Holds up to 2 inch diameter tubing
Price: $15.30
BuildPro Table Mount Clamp, 2 x 2-3/8 inch
- For use with BuildPro Welding Tables
- Removable 5/8 peg allows for many mounting options
- 2 inch reach
Price: $20.80
Van Sant Enterprises, Inc.
- 75 Truman Road
- Pella, IA 50219
- Map & Directions
- Toll Free: 877-826-7268
- Phone: 641-628-3860
- Fax: 641-628-2614
- E-mail: [email protected]
- Business Hours: Mon-Fri 8am - 5pm CST
Connect with Us
Copyright © Van Sant Enterprises, Inc. All Rights Reserved.
Site by OneDogMedia
Terms & Conditions | Privacy Policy | Sitemap
Site by OneDogMedia
Terms & Conditions | Privacy Policy | Sitemap
