In-stock orders placed before 3 pm Central Time ship same day! Click here for details →
2 X 36, Polishing Belt--White
- Products (6013)
- Youtube (335)
- Facebook (189)
Categories
Shop By BRAND
Covell Slap Hammer
…chrome-moly steel and heat-treated to Rockwell 44 for durability, then polished to a high luster and laser engraved with the Covell logo. The…
Product Details »
Roper Whitney 42 inch Slip Roll, 3 Driven Rolls, 24 gauge
Roper Whitney's 0381 slip roll combines precision-turned, ground, and polished high carbon steel rolls with heavy-duty, cast iron end frames and a…
Product Details »
Roper Whitney 24 inch Slip Roll, 3 Driven Rolls, 20 gauge
Roper Whitney's 383 slip roll combines precision-turned, ground, and polished high carbon steel rolls with heavy-duty, cast iron end frames and a…
Product Details »
Roper Whitney 48 inch Slip Roll, 3 Driven Rolls, 16 gauge
…Whitney's 48 inch slip roll combines precision-turned, ground, and polished high carbon steel rolls with heavy-duty cast iron end frames. Convenient…
Product Details »
Hulk Bender Rolls, Hand Rail Cap
…a lifetime of quality service while standard steel is also available. Delrin rolls will provide scratch resistance on soft or polished materials.
Product Details »
Rectangle Notcher for Scotchman Porta-Fab 45
The Scotchman Rectangle Notcher is used to take a 1-3/4 inch wide by up to 2 inch deep notch out of 1/4 inch and under plate. It can also be used to…
Product Details »
Pipe Notcher Housing for Scotchman
…Housing fits all Scotchman Ironworkers. It can accept tooling from 3/4 to 2 inch pipe. Tooling is required and sold separately. A pusher block is also…
Product Details »
Slugger Annular Cutter Arbor, MT2
…quickly and easily adapts Slugger annular cutters to machines that use a 2 Morse taper. This quality industrial arbor has a spring loaded slug…
Product Details »
ALPHA28 V-Block, 90 degree
…material. The 90-degree v-block for ALPHA28 welding tables holds up to 2 inch round material and can be mounted to the table, riser blocks,…
Product Details »
Icengineworks 2000EH Series 3 inch CLR Cutting Spacer
This replacement cut spacer is for 2 inch OD tubing with a 3 inch centerline radius (CLR). The Icengineworks cut spacers match the inside radius of…
Product Details »
Icengineworks 2000EH Series 4 inch CLR Cutting Spacer
This replacement cut spacer is for 2 inch OD tubing with a 4 inch centerline radius (CLR). The Icengineworks cut spacers match the inside radius of…
Product Details »
Icengineworks 2000EH Series 6 inch CLR Cutting Spacer
This replacement cut spacer is for 2 inch OD tubing with a 6 inch centerline radius (CLR). The Icengineworks cut spacers match the inside radius of…
Product Details »
Flextur Locator Pin Set, 3/4 inch OD
…that includes a Pin Rack for onboard Gridlok tool board panels. Additional Locator pins are available in 1/4 inch increments from 3/4 to 2 inches.
Product Details »
Flextur Locator Pin Set, 1 inch OD
…that includes a Pin Rack for onboard Gridlok tool board panels. Additional Locator pins are available in 1/4 inch increments from 3/4 to 2 inches.
Product Details »
Flextur Locator Pin Set, 1-1/4 inch OD
…that includes a Pin Rack for onboard Gridlok tool board panels. Additional Locator pins are available in 1/4 inch increments from 3/4 to 2 inches.
Product Details »
Flextur Locator Pin Set, 1-3/4 inch OD
…that includes a Pin Rack for onboard Gridlok tool board panels. Additional Locator pins are available in 1/4 inch increments from 3/4 to 2 inches.
Product Details »
JS Tools Flame Bead Roll Die Set
…for JS Tools Bead Rollers but work with other machines with 20mm shafts and 2 inch shaft center to center distance. JS Tools roll sets are meant to be…
Product Details »
Quick Set Punch Gauging Table Attachment for Piranha P65
…the Piranha P65 and includes the gauging table and 5 stops for about 2 feet of gauging. You can also purchase 5 or 10 foot sections for additional…
Product Details »
Adjustable Channel Shear for Piranha P65
…Piranha P65 Ironworkers and uses pinned slide blocks to adjust for cutting 2 to 6 inch standard channel. It attaches to the punch station and includes…
Product Details »
Quick Set Punch Gauging Table Attchment for Piranha P110 & P140
…the Piranha P65 and includes the gauging table and 5 stops for about 2 feet of gauging. You can also purchase 5 or 10 foot sections for additional…
Product Details »
Fein Assorted T-Shank Jigsaw Blades 5 Piece Starter Set
Fein Assorted T-Shank Jigsaw Blades 5 Piece Starter Set Includes: 2 - 23-18 TPI Thin Metal Blades 63503167010 1 - 11-13 TPI Thick Metal Blade…
Product Details »
Versa-Mount Mobile Universal Tool Stand
…to provide the perfect combination of stability and mobility. The 5-1/4 x 10-inch mounting plate is laser cut from 1/2 thick steel that is then…
Product Details »
Tapping Adapter for Fein Cordless Drill/Drivers
Tapping adapter with 2 collets for DIN taps (4.5mm and 6mm shaft diameters) for cutting #8-5/16 (M4-M8) threads. Square receivers hold the square end…
Product Details »
Best of Starlock Sanding Set for Fein MultiMaster
…available multi-tools with the Starlock mounting system. Includes: 2 sanding pads, unperforated (3-1/8 inch), 1 sanding finger, 30 sanding…
Product Details »Sale Price: $34.95
Van Sant Enterprises, Inc.
- 75 Truman Road
- Pella, IA 50219
- Map & Directions
- Toll Free: 877-826-7268
- Phone: 641-628-3860
- E-mail: [email protected]
- Business Hours: Mon-Fri 8am - 5pm CST
Connect with Us
Terms & Conditions | Privacy Policy | Sitemap
