In-stock orders placed before 3 pm Central Time ship same day! Click here for details →
8 Inch Grinder/Drill_Presses_74/Plasma Tube Pipe Notchers 902/Kalamazoo Industries Store 1020
- Products (9807)
- Youtube (639)
- Facebook (618)
Categories
Shop By BRAND
Baileigh RDB-050 Bender Die, 1-1/4 inch OD x 5 inch CLR, 180 degrees
…and can be used to bend the specified size tubing. OD - refers to actual Outside Diameter of the tube as measured with a caliper. Minimum Wall -…
Product Details »
Baileigh RDB-050 Bender Die, 1-1/2 inch OD x 5 inch CLR, 180 degrees
…and can be used to bend the specified size tubing. OD - refers to actual Outside Diameter of the tube as measured with a caliper. Minimum Wall -…
Product Details »
Baileigh RDB-050 Bender Die, 1-1/2 inch OD x 5.5 inch CLR, 180 degrees
…and can be used to bend the specified size tubing. OD - refers to actual Outside Diameter of the tube as measured with a caliper. Minimum Wall -…
Product Details »
Baileigh RDB-050 Bender Die, 1-1/2 inch OD x 6 inch CLR, 180 degrees
…and can be used to bend the specified size tubing. OD - refers to actual Outside Diameter of the tube as measured with a caliper. Minimum Wall -…
Product Details »
Baileigh RDB-050 Bender Die, 1-3/4 inch OD x 6 inch CLR, 180 degrees
…and can be used to bend the specified size tubing. OD - refers to actual Outside Diameter of the tube as measured with a caliper. Minimum Wall -…
Product Details »
Baileigh RDB-050 Bender Die, 1-3/4 inch OD x 6.5 inch CLR, 180 degrees
…and can be used to bend the specified size tubing. OD - refers to actual Outside Diameter of the tube as measured with a caliper. Minimum Wall -…
Product Details »
Baileigh RDB-050 Bender Die, 1-3/4 inch OD x 7 inch CLR, 180 degrees
…and can be used to bend the specified size tubing. OD - refers to actual Outside Diameter of the tube as measured with a caliper. Minimum Wall -…
Product Details »
Baileigh RDB-050 Bender Die, 2 inch OD x 6 inch CLR, 180 degrees
…and can be used to bend the specified size tubing. OD - refers to actual Outside Diameter of the tube as measured with a caliper. Minimum Wall -…
Product Details »
Baileigh RDB-050 Bender Die, 2 inch OD x 6.5 inch CLR, 180 degrees
…and can be used to bend the specified size tubing. OD - refers to actual Outside Diameter of the tube as measured with a caliper. Minimum Wall -…
Product Details »
Baileigh RDB-050 Bender Die, 2 inch OD x 7 inch CLR, 180 degrees
…and can be used to bend the specified size tubing. OD - refers to actual Outside Diameter of the tube as measured with a caliper. Minimum Wall -…
Product Details »
Baileigh RDB-050 Bender Die, 2-1/2 inch OD x 7 inch CLR, 180 degrees
…and can be used to bend the specified size tubing. OD - refers to actual Outside Diameter of the tube as measured with a caliper. Minimum Wall -…
Product Details »
Baileigh Bender Die, 2x4 inch RECTANGLE Hard Way x 7 inch IR, .120 wall
This die fits the Baileigh MB-4X2 tubing bender and will bend .120 wall 2x4 inch the hard way. This die set will bend up to 100 degrees.
Product Details »
Baileigh Bender Die, 2x4 inch RECTANGLE Easy Way x 7 inch IR, .120 wall
This die fits the Baileigh MB-4X2 tubing bender and will bend .120 wall 2x4 inch the easy way. This die set will bend up to 100 degrees.
Product Details »
7/8 inch High Helix End Mill Cutter
End mill cutter for Mittler Bros. Ultimate Notcher. High Helix design for thin wall tubing. (requires 3/4 inch adapter bushing)
Product Details »
3/4 inch High Helix End Mill Cutter
End mill cutter for Mittler Bros. Ultimate Notcher. High Helix design for thin wall tubing. (requires 3/4 inch adapter bushing)
Product Details »
5/8 inch High Helix End Mill Cutter
End mill cutter for Mittler Bros. Ultimate Notcher. High Helix design for thin wall tubing. (requires 5/8 inch adapter bushing)
Product Details »
1/2 inch High Helix End Mill Cutter
End mill cutter for Mittler Bros. Ultimate Notcher. High Helix design for thin wall tubing. (requires 1/2 inch adapter bushing)
Product Details »
Steel Wire Crimp Wheel 10 x 1-1/8 with 2 inch Arbor
Steel Wire Crimp Wheel 10 x 1-1/8 with 2 inch Arbor for Burr King 1051 Tube Finishing Machine. The 1051 can be used with two of these wire wheels…
Product Details »
Ercolina Die Set, 1 inch SQUARE x 5.9 inch CLR (150mm), 180 degrees, 50mm drive
…fits the Ercolina Tube Bender and can be used to bend the specified size tubing. OD - refers to actual Outside Diameter of the tube as measured with a…
Product Details »
Ercolina Die Set, 1-1/2 inch SQUARE x 5.9 inch CLR (150mm), 180 degrees, 50mm drive
…fits the Ercolina Tube Bender and can be used to bend the specified size tubing. OD - refers to actual Outside Diameter of the tube as measured with a…
Product Details »
Ercolina Die Set, 2 inch SQUARE x 5.9 inch CLR (150mm), 180 degrees, 50mm drive
…fits the Ercolina Tube Bender and can be used to bend the specified size tubing. OD - refers to actual Outside Diameter of the tube as measured with a…
Product Details »
Ercolina Die Set, 3 inch OD x 10.2 inch CLR (260mm), 180 degrees, 80mm drive
…fits the Ercolina Tube Bender and can be used to bend the specified size tubing. OD - refers to actual Outside Diameter of the tube as measured with a…
Product Details »
Ercolina Die Set, 3 inch OD x 11.8 inch CLR (300mm), 180 degrees, 80mm drive
…fits the Ercolina Tube Bender and can be used to bend the specified size tubing. OD - refers to actual Outside Diameter of the tube as measured with a…
Product Details »
1/2 x 13, 80 grit Sanding Belts, 10 pack
These standard Aluminum Oxide Belts fit the 525 Industries Tubing Sander and are ideally suited for grinding around contours on metal tubing.
Product Details »
Van Sant Enterprises, Inc.
- 75 Truman Road
- Pella, IA 50219
- Map & Directions
- Toll Free: 877-826-7268
- Phone: 641-628-3860
- E-mail: [email protected]
- Business Hours: Mon-Fri 8am - 5pm CST
Connect with Us
Terms & Conditions | Privacy Policy | Sitemap
