In-stock orders placed before 3 pm Central Time ship same day! Click here for details →
Hole
- Products (1567)
- Youtube (121)
- Facebook (60)
Categories
Shop By BRAND
BuildPro Table Mount Clamp, 3 x 4 inch
…threads holding a removable peg that fits any welding table with 5/8 holes. The push down to lock and pull up to release is good for repetitious…
Product Details »
BuildPro Table Mount Clamp, 3-3/8 x 4 inch
…threads holding a removable peg that fits any welding table with 5/8 holes. The push down to lock and pull up to release is good for repetitious…
Product Details »
BuildPro Inserta Clamp, 8-1/2 x 4 inch
…easy clamping on your BuildPro table or any welding table with 5/8 inch holes. These clamps have an 8-1/2 inch height and 4-inch throat depth with a…
Product Details »
Flowdrill Bit for 1/4-20 Tap (5.7mm) Long Flat
…and brass. Flat cutters incorporate a cutting edge to provide a smooth, flush top to the formed hole. See documents tab for speed and hp requirements.
Product Details »
Flowdrill Bit for #4-40 Tap (2.5mm) Short Flat
…and brass. Flat cutters incorporate a cutting edge to provide a smooth, flush top to the formed hole. See documents tab for speed and hp requirements.
Product Details »
Flowdrill Bit for #4-40 Tap (2.5mm) Long Flat
…and brass. Flat cutters incorporate a cutting edge to provide a smooth, flush top to the formed hole. See documents tab for speed and hp requirements.
Product Details »
Flowdrill Bit for #5-40 Tap (2.9mm) Short Flat
…and brass. Flat cutters incorporate a cutting edge to provide a smooth, flush top to the formed hole. See documents tab for speed and hp requirements.
Product Details »
Flowdrill Bit for #5-40 Tap (2.9mm) Long Flat
…and brass. Flat cutters incorporate a cutting edge to provide a smooth, flush top to the formed hole. See documents tab for speed and hp requirements.
Product Details »
Flowdrill Bit for #6-32 Tap (3.1mm) Short Flat
…and brass. Flat cutters incorporate a cutting edge to provide a smooth, flush top to the formed hole. See documents tab for speed and hp requirements.
Product Details »
Flowdrill Bit for #6-32 Tap (3.1mm) Long Flat
…and brass. Flat cutters incorporate a cutting edge to provide a smooth, flush top to the formed hole. See documents tab for speed and hp requirements.
Product Details »
Flowdrill Bit for #8-32 Tap (3.8mm) Short Flat
…and brass. Flat cutters incorporate a cutting edge to provide a smooth, flush top to the formed hole. See documents tab for speed and hp requirements.
Product Details »
Flowdrill Bit for #8-32 Tap (3.8mm) Long Flat
…and brass. Flat cutters incorporate a cutting edge to provide a smooth, flush top to the formed hole. See documents tab for speed and hp requirements.
Product Details »
Flowdrill Bit for #10-24 Tap (4.3mm) Short Flat
…and brass. Flat cutters incorporate a cutting edge to provide a smooth, flush top to the formed hole. See documents tab for speed and hp requirements.
Product Details »
Flowdrill Bit for #10-24 Tap (4.3mm) Long Flat
…and brass. Flat cutters incorporate a cutting edge to provide a smooth, flush top to the formed hole. See documents tab for speed and hp requirements.
Product Details »
Flowdrill Bit for #12-24 Tap (4.9mm) Short Flat
…and brass. Flat cutters incorporate a cutting edge to provide a smooth, flush top to the formed hole. See documents tab for speed and hp requirements.
Product Details »
Flowdrill Bit for #12-24 Tap (4.9mm) Long Flat
…and brass. Flat cutters incorporate a cutting edge to provide a smooth, flush top to the formed hole. See documents tab for speed and hp requirements.
Product Details »
Flowdrill Bit for 1/4-20 Tap (5.7mm) Short Flat
…and brass. Flat cutters incorporate a cutting edge to provide a smooth, flush top to the formed hole. See documents tab for speed and hp requirements.
Product Details »
Flowdrill Bit for 5/16-18 Tap (7.2mm) Short Flat
…and brass. Flat cutters incorporate a cutting edge to provide a smooth, flush top to the formed hole. See documents tab for speed and hp requirements.
Product Details »
Flowdrill Bit for 5/16-18 Tap (7.2mm) Long Flat
…and brass. Flat cutters incorporate a cutting edge to provide a smooth, flush top to the formed hole. See documents tab for speed and hp requirements.
Product Details »
Flowdrill Bit for 3/8-16 Tap (8.7mm) Short Flat
…and brass. Flat cutters incorporate a cutting edge to provide a smooth, flush top to the formed hole. See documents tab for speed and hp requirements.
Product Details »
Flowdrill Bit for 3/8-16 Tap (8.7mm) Long Flat
…and brass. Flat cutters incorporate a cutting edge to provide a smooth, flush top to the formed hole. See documents tab for speed and hp requirements.
Product Details »
Flowdrill Bit for 7/16-14 Tap (10.2mm) Short Flat
…and brass. Flat cutters incorporate a cutting edge to provide a smooth, flush top to the formed hole. See documents tab for speed and hp requirements.
Product Details »
Flowdrill Bit for 7/16-14 Tap (10.2mm) Long Flat
…and brass. Flat cutters incorporate a cutting edge to provide a smooth, flush top to the formed hole. See documents tab for speed and hp requirements.
Product Details »
Flowdrill Bit for 1/2-13 Tap (11.7mm) Short Flat
…and brass. Flat cutters incorporate a cutting edge to provide a smooth, flush top to the formed hole. See documents tab for speed and hp requirements.
Product Details »
Van Sant Enterprises, Inc.
- 75 Truman Road
- Pella, IA 50219
- Map & Directions
- Toll Free: 877-826-7268
- Phone: 641-628-3860
- E-mail: [email protected]
- Business Hours: Mon-Fri 8am - 5pm CST
Connect with Us
Terms & Conditions | Privacy Policy | Sitemap
