In-stock orders placed before 3 pm Central Time ship same day! Click here for details →
Huth
- Products (441)
- Youtube (24)
- Facebook (19)
Categories
Shop By BRAND
Huth 508 Arbor, 1-3/8 to 4 inch (requires 498 or 499 Huth Arbor tip)
This Huth arbor is designed for use with expanders for 1-3/8 inch to 4 inch tubing.
Product Details »
Huth Arbor, 2-3/4 inch ID – 5-1/2 inch ID
Huth Arbor, 2-3/4 inch ID – 5-1/2 inch ID
Product Details »
Steel O-Ring Kit for Huth Expanders, 25 pack
This Replacement Steel O-Ring Kit for Huth Segment Sets replaces brittle and cracked rubber o-rings on factory Huth and Ben Pearson expander segments.…
Product Details »
Huth 45 degree Flaring Segment, 1-1/8 to 1-1/2 inch
This Huth flanger is designed for 1-1/8 inch to 1-1/2 inch material. It works on Huth expander machines and requires a 575 Arbor with 570 Spacer.
Product Details »
Huth Back Shoe, 1-1/4 NPS (1.660 inch OD), 42mm
Two of these Huth Back Shoes are required along with one radius die to perform a bend on Huth Exhaust Benders. Price is for one.
Product Details »
Huth Back Shoe, 1-1/2 NPS (1.90 inch OD), 48mm
Two of these Huth Back Shoes are required along with one radius die to perform a bend on Huth Exhaust Benders. Price is for one.
Product Details »
Huth Back Shoe, 3/4 NPS (1.050 inch OD)
Two of these Huth Back Shoes are required along with one radius die to perform a bend on Huth Exhaust Benders. Price is for one.
Product Details »
Huth Back Shoe, 1-1/16 inch OD (1.163 EMT)
Two of these Huth Back Shoes are required along with one radius die to perform a bend on Huth Exhaust Benders. Price is for one.
Product Details »
Huth Back Shoe, 2 x 3 RECTANGULAR Hard Way
Two of these Huth Back Shoes are required along with one radius die to perform a bend on Huth Exhaust Benders. Price is for one.
Product Details »
Huth Back Shoe, 2 x 3 RECTANGULAR Easy Way
Two of these Huth Back Shoes are required along with one radius die to perform a bend on Huth Exhaust Benders. Price is for one.
Product Details »
Huth Back Shoe, 3/4 to 1-1/2 inch SQUARE
Two of these Huth Back Shoes are required along with one radius die to perform a bend on Huth Exhaust Benders. Price is for one.
Product Details »
Huth 45 degree Flaring Segment, 1-1/2 to 2-1/2 inch
This Huth flanger is designed for 1-1/2 to 2-1/2 inch material. It works on Huth expander machines and requires a 508 Arbor with 499 tip, or 573 one…
Product Details »
Huth 45 degree Flaring Segment, 2-1/2 to 3-1/2 inch
This Huth flanger is designed for 2-1/2 to 3-1/2 inch material. It works on Huth expander machines and requires a 508 Arbor with 499 tip, or 573 one…
Product Details »
Huth 573 One-Piece Arbor, 1-3/4 to 4 inch
This Huth arbor is designed for use with expanders for 1-3/4 inch to 4 inch tubing.
Product Details »
Huth Half Shoe, 3/4 NPS (1.050 inch OD)
Two Huth Back Shoes are required along with one radius die to perform a bend on Huth Exhaust Benders. Half Shoes allow for extra clearance for close…
Product Details »
Huth Half Shoe, 1-1/16 inch OD (1.163 EMT)
Two Huth Back Shoes are required along with one radius die to perform a bend on Huth Exhaust Benders. Half Shoes allow for extra clearance for close…
Product Details »
498 Arbor Tip for Huth Expander, 1-3/8 to 1-3/4 inch
This Huth arbor tip is designed for use with expanders for 1-3/8 inch to 1-3/4 inch tubing.
Product Details »
499 Arbor Tip for Huth Expander, 1-3/4 to 4 inch
This Huth arbor tip is designed for use with expanders for 1-3/4 inch to 4 inch tubing.
Product Details »
Huth Clamp Collet, 2-3/4 inch, (requires 892 Holder)
This Huth clamping collet is designed for clamping 2-3/4 inch OD material during reducing or swaging operations.
Product Details »
Huth Clamp Collet, 3 inch, (requires 892 Holder)
This Huth clamping collet is designed for clamping 3 inch OD material during reducing or swaging operations.
Product Details »
Huth Clamp Collet, 2-7/8 inch, (requires 892 Holder)
This Huth clamping collet is designed for clamping 2-7/8 inch OD material during reducing or swaging operations.
Product Details »
Huth Expander Segment, 1-3/32 inch to 1-1/4 inch
This Huth expander tooling is designed to expand tubing from 1-3/32 to 1-1/4 inch ID. Used with 575 arbor and 570 Spacer or 496 Arbor.
Product Details »
Huth Expander Segment, 1-3/16 inch to 1-1/2 inch
This Huth expander tooling is designed to expand tubing from 1-3/16 to 1-1/2 inch ID. Used with 500 or 495 Arbor.
Product Details »
Huth Expander Segment, 1-3/8 inch to 1-3/4 inch, Yellow
This Huth expander tooling is designed to expand tubing from 1-3/8 to 1-3/4 inch ID. Used with 508 Arbor and 498 Tip or 572 Arbor.
Product Details »
Van Sant Enterprises, Inc.
- 75 Truman Road
- Pella, IA 50219
- Map & Directions
- Toll Free: 877-826-7268
- Phone: 641-628-3860
- E-mail: [email protected]
- Business Hours: Mon-Fri 8am - 5pm CST
Connect with Us
Terms & Conditions | Privacy Policy | Sitemap
