In-stock orders placed before 3 pm Central Time ship same day! Click here for details →
V-Blocks, Rests and Stops
BuildPro V-Pads and Stops are designed to work with Strong Hand BuildPro tables and are great for fixturing production or one off parts for fabrication and welding. These accessories are based on a 5/8 inch (16mm) diameter round hole pattern found on all BuildPro Tables.
Searching...
BuildPro Aluminum V-Block with 120 degree angle
- For use with BuildPro Welding Tables
- Fits round stock up to 2-1/2 inches in diameter
- Aluminum construction
Price: $8.20
BuildPro Setup Cone for Round Tubing or Pipe
NEW
- For use with BuildPro Welding Tables
- Includes 5/8 inch locating post and locking pin
- Center 3/8 to 1-3/4 inch tubing
Price: $25.80
BuildPro Bend Rest with 120 degree angle - Small
NEW
- For use with BuildPro Welding Tables
- Supports round stock in bends and elbows
- Holds up to 2.5 inch OD tubing
Price: $14.00
BuildPro Bend Rest with 120 degree angle - Medium
NEW
- For use with BuildPro Welding Tables
- Supports round stock in bends and elbows
- Holds up to 3 inch OD tubing
Price: $14.60
BuildPro Bend Rest with 150 degree angle - Large
NEW
- For use with BuildPro Welding Tables
- Supports round stock in bends and elbows
- Holds up to 8 inch OD tubing
Price: $16.00
Magnetic V-Pad Pack
- 2 large and 2 small v-pads
- Great for holding round, square and flat material
- Each pad contains 4 rare earth magnets
Price: $38.50
BuildPro V-Block with 90 degree angle
- For use with BuildPro Welding Tables
- Holds up to 2 inch diameter tubing
Price: $15.30
BuildPro Sliding Channel Base, Threaded Center Hole
- For use with BuildPro Welding Tables
Price: $19.10
Price: $19.10
Price: $19.10
Price: $10.00
Price: $5.60
BuildPro Adjustable Magnetic Spacer, 1-1/4 to 2-1/2 inch
- Magnetic to stick anywhere on table
- Adjustable from 1-1/4 inch to 2-1/2 inch
Price: $6.22
BuildPro Adjustable Magnetic Spacer, 3/4 to 1-1/2 inch
- Magnetic to stick anywhere on table
- Adjustable from 3/4 inch to 1-1/2 inch
Price: $4.40
BuildPro Adjustable Magnetic Spacer, 1/2 to 1 inch
- Magnetic to stick anywhere on table
- Adjustable from 1/2 inch to 1 inch
Price: $4.40
BuildPro 10 x 1.18 x 1/2 inch Straight Edge Stop with 4 Holes, 1 Slot
- For use with BuildPro Welding Tables
Price: $26.90
BuildPro 8 x 1 x 1/2 inch Straight Edge Stop with 2 Holes, 2 Slots
- For use with BuildPro Welding Tables
Price: $20.80
BuildPro 6 x 1.18 x 1/2 inch Straight Edge Stop with 1 Hole, 1 Slot
- For use with BuildPro Welding Tables
Price: $19.60
BuildPro 1/2 inch high x 3-5/8 inch long D-Stop Bar
- For use with BuildPro Welding Tables
Price: $20.80
BuildPro 0.45 Inch High x 4.8 Inch Long D-Stop Bar
- Anodized Aluminum
- Round and flat end
Price: $19.10
BuildPro 1/2 inch high x 6-1/4 inch long D-Stop Bar
- For use with BuildPro Welding Tables
Price: $32.50
BuildPro 1 inch high x 6-1/4 inch long D-Stop Bar
- For use with BuildPro Welding Tables
Price: $32.80
Price: $8.75
Price: $5.04
Price: $10.55
Van Sant Enterprises, Inc.
- 75 Truman Road
- Pella, IA 50219
- Map & Directions
- Toll Free: 877-826-7268
- Phone: 641-628-3860
- Fax: 641-628-2614
- E-mail: [email protected]
- Business Hours: Mon-Fri 8am - 5pm CST
Connect with Us
Copyright © Van Sant Enterprises, Inc. All Rights Reserved.
Site by OneDogMedia
Terms & Conditions | Privacy Policy | Sitemap
Site by OneDogMedia
Terms & Conditions | Privacy Policy | Sitemap
