In-stock orders placed before 3 pm Central Time ship same day! Click here for details →

Ercolina Bender Nominal Pipe Dies

These dies fit the Ercolina Tube Bender and can be used to bend the specified size in mild steel, stainless steel, and more.

Material Size - refers to the Nominal Pipe Size (Outside Diameter of the tube as measured with a caliper is noted in parenthesis)
CLR - stands for Center Line Radius, meaning the bend radius as measured from the center rotation point of the die to the middle of the tubing. (see image)
Minimum Wall - denotes the minimum recommended wall thickness for consistent high quality wrinkle free bends at the specified radius.
Maximum Wall - click on individual die part number for specific info
Max Degree of Bend - Dies can bend up to a full U-bend of 180 degrees after springback.

**Counterbending die support 050E required when bending radii 225mm and larger. (Not required for TB100/TB130/TB180)

Filter Selection »

Narrow by Sub Category

Search Results

Searching...

See All Products

12 Next

Sort by:

12 Next

Searching...

See All Products

Sort by:

Click on the Part Number in the chart below to get item specifics and lead time info.

Part Number	Material Size	Center Line Radius (CLR)	Minimum Wall Thickness	Max Degree of Bend	Most Common	Price
153R067P0500-set	1/2 NPS (.840)	2.6 (67mm)	Schedule 5	180		Price: $1,030.00
153R082P0750-set	3/4 NPS (1.050)	3.2 (82mm)	Schedule 5	180		Price: $1,140.00
153R112P1000-set	1 NPS (1.315)	4.4 (112mm)	Schedule 5	180		Price: $1,400.00
153R150P1250-set	1-1/4 NPS (1.660)	5.9 (150mm)	Schedule 5	180		Price: $1,670.00
153R190P1250-set	1-1/4 NPS (1.660)	7.5 (190mm)	Schedule 5	180		Price: $2,320.00
153R190P1500-set	1-1/2 NPS (1.900)	7.5 (190mm)	Schedule 5	180		Price: $2,320.00
153R190P2000-set	2 NPS (2.375)	7.5 (190mm)	Schedule 5	180		Price: $2,420.00
157R225P2000-set	2 NPS (2.375)	8.9 (225mm)**	Schedule 5	180		Price: $3,860.00
157R260P2000-set	2 NPS (2.375)	10.2 (260mm)**	Schedule 5	180		Price: $5,460.00
157R300P2000-set	2 NPS (2.375)	11.8 (300mm)**	Schedule 5	180		Price: $5,820.00
157R260P2000-80-set	2 NPS (2.375)	10.2 (260mm)**	Schedule 5	180		Price: $7,250.00
157R300P2000-80-set	2 NPS (2.375)	11.8 (300mm)**	Schedule 5	180		Price: $8,550.00

Van Sant Enterprises, Inc.

75 Truman Road
Pella, IA 50219
Map & Directions
Toll Free: 877-826-7268
Phone: 641-628-3860
Fax: 641-628-2614
E-mail: [email protected]
Business Hours: Mon-Fri 8am - 5pm CST

About Us

Customer Service

Ercolina Bender Nominal Pipe Dies

Shop by
BRAND

MINIMUM WALL (IN)

MAX DEGREE OF BEND

Ercolina Die Set, 1/2 inch NPS (.840 OD) x 2.6 inch CLR (67mm), 180 degrees, 40mm drive

Ercolina Die Set, 3/4 inch NPS (1.050 OD) x 3.2 inch CLR (82mm), 180 degrees, 40mm drive

Ercolina Die Set, 1 inch NPS (1.315 OD) x 4.4 inch CLR (112mm), 180 degrees, 40mm drive

Ercolina Die Set, 1-1/4 inch NPS (1.660 OD) x 5.9 inch CLR (150mm), 180 degrees, 50mm drive

Ercolina Die Set, 1-1/4 inch NPS (1.660 OD) x 7.5 inch CLR (190mm), 180 degrees, 50mm drive

Ercolina Die Set, 1-1/2 inch NPS (1.900 OD) x 7.5 inch CLR (190mm), 180 degrees, 50mm drive

Ercolina Die Set, 2 inch NPS (2.375 OD) x 7.5 inch CLR (190mm), 180 degrees, 50mm drive

Ercolina Die Set, 2 inch NPS (2.375 OD) x 8.9 inch CLR (225mm), 180 degrees, 50mm drive

Ercolina Die Set, 2 inch NPS (2.375 OD) x 10.2 inch CLR (260mm), 180 degrees, 50mm drive