Scotchman Store

• Can flatten and trim 1 inch square tube for pickets when used in the picket tool housing
• Requires Picket Tool Housing

• Can cut a 1-3/4 inch wide by up to 2 inch deep notch in up to 1/4 inch material
• Can cut a 1-3/4 inch rectangle notch in 1/4 in material
• For Porta-Fab 45, 50514-CM and 5014-TM machines

• Can cut a 2 inch wide by up to 2-1/2 inch deep notch in up to 3/8 inch material
• Can cut a 2 inch rectangle notch in 3/8 in material
• For 6509-24M and 9012-24M machines

• Can cut a 2 inch wide by up to 2-1/2 inch deep notch in up to 3/8 inch material
• Can cut a 2 inch rectangle notch in 3/8 in material
• For 12012-24M machines

• Can cut a 6 x 6 inch v-notch in up to 1/8 inch material
• Can cut a 3 inch 90 degree v-notch in 1/4 inch material

• Can cut a 6 inch by 6 inch v-notch in up to 5/16 inch material
• For 6509-24M machine

• Can cut a 6 inch by 6 inch v-notch in up to 5/16 inch material
• For 9012-24M machine

• Can cut a 6 inch by 6 inch v-notch in up to 5/16 inch material
• For 12012-24M machine

• Can shear up to 1 inch round bar and 3/4 inch square bar

• Can shear up to 1-1/4 inch round bar and 1 inch square bar
• For 6509-24M, 9012-24M and 12012-24M machines

• Can shear 2 inch to 6 inch channel iron
• For 6509-24M, 9012-24M and 12012-24M machines

• Can shear 2 inch to 6 inch channel iron
• For Scotchman FI8510-20M Ironworkers
• Mounts in the punch station

• Can shear 1/2 inch to 1 inch square tube, up to 14 gauge
• For Porta-Fab 45, 50514-EC and 5014-ET machine

• Can shear 1/2 inch to 2 inch square tube, up to 14 gauge
• For 6509-24M, 9012-24M and 12012-24M machine

• Projects laser light onto bar shear
• Installed on existing machines
• For 50514-CM, 50514-EC machines

• Projects laser light onto bar shear
• Installed on existing machines
• For 5014-TM and 5014-ET machine

• Projects laser light onto bar shear
• Installed on machine during production
• For 50514-CM machine

• Projects laser light onto bar shear
• Installed on machine during production
• For 5014-ET machine

• Projects laser light onto bar shear
• Installed on machine during production
• For 6509-24M, 9012-24M and 12012-24M machines

Product Details »

• Can be used as a manual length stop for the bar shear, or any tool set in open station
• For 50514-EC, 5014-ET, 6509-24M, 9012-24M and 12012-24M machines

• Used with tools in open station
• For 50514-CM, 50514-EC and 5014-TM machines

• Used with tools in open station
• For 9012-24M and 12012-24M machines

• Used with tools in open station
• For 50514-CM and 5014-TM machines

• Mounts to punching station
• Allow accurate and repeatable hole punching
• For 5014-ET machines