In-stock orders placed before 3 pm Central Time ship same day! Click here for details →
Strong Hand Tools Store
Strong Hand Tools specializes in welding tables, fixturing tables, welding clamps and pliers to reduce production and set-up time for metalworking. From the economical BuildPro line to the high precision Siegmund Welding Tables Strong Hand has a system for any application. Check out their entire line below.
Narrow by Sub Category
Searching...
Standard Positioning Magnet, 30/60/90 degree
- Holds round and flat stock
- 30/60/90 degree fixed angles
- 45 lbs of magnetic force
- 4.375 x 3.75 x .75 inches
Price: $26.40
Price: $32.50
BuildPro Bench Stone
NEW
- Great for maintaining fixture tables
- 100 and 400 grit
- Plastic holder with non-slip rubber
Price: $21.30
Wire Brush Scraper with Handle
NEW
- Great for maintaining fixture tables
- Detachable handle
- Stainless steel wire brush and scraper
Price: $19.25
BuildPro Ball Lock Bolt, Short, connects 2 accessories together
- For BuildPro welding tables with 5/8 inch holes
- Connects 2 accessories together
- 0.9 inch capacity
Price: $24.70
BuildPro Ball Lock Bolt, Short, connects 2 accessories together, 12 pack
- For BuildPro welding tables with 5/8 inch holes
- Connects 2 accessories together
- 0.9 inch capacity
- 12 pack
Price: $266.00
Sale Price: $237.00
Sale Price: $237.00
BuildPro Ball Lock Bolt, Flush, connects 2 accessories together
- For use with BuildPro Welding Tables
Price: $24.10
BuildPro Ball Lock Bolt, Flush, connects an accessory to the table
- For use with BuildPro Welding Tables
Price: $24.70
Price: $19.10
BuildPro Hook Clamp, 5/16-18
- For use with BuildPro Welding Tables
- Fits 5/8 inch holes
Price: $15.25
BuildPro Spring Push Pin for 5/8 and 16mm Holes
NEW
- Applys light pressure to secure work pieces
- For use with BuildPro Welding Tables
- Fits 5/8 inch or 16mm holes
Price: $8.40
BuildPro Socket Shoulder Screw Set, Standard, 3/4 inch shoulder
- For use with BuildPro Welding Tables
Price: $6.50
Price: $5.00
Price: $5.00
Price: $50.50
Price: $19.10
BuildPro Sliding Channel Base, Threaded Center Hole
- For use with BuildPro Welding Tables
Price: $19.10
BuildPro 360 degree Clamp, 8-1/2 x 4-3/4 inch
- For use with standard BuildPro Welding Tables
- Pivots 360 degrees
- Fits into 1-3/4 inch slot between plates
Price: $59.50
BuildPro 360 degree Clamp, 12-1/2 x 4-3/4 inch
- For use with standard BuildPro Welding Tables
- Pivots 360 degrees
- Fits into 1-3/4 inch slot between plates
Price: $68.50
BuildPro 360 degree Clamp, 20-1/2 x 5-1/2 inch
- For use with standard BuildPro Welding Tables
- Pivots 360 degrees
- Fits into 1-3/4 inch slots between plates
Price: $109.00
BuildPro V-Block with 90 degree angle
- For use with BuildPro Welding Tables
- Holds up to 2 inch diameter tubing
Price: $15.30
BuildPro Setup Cone for Round Tubing or Pipe
NEW
- For use with BuildPro Welding Tables
- Includes 5/8 inch locating post and locking pin
- Center 3/8 to 1-3/4 inch tubing
Price: $25.80
BuildPro Bend Rest with 120 degree angle - Small
NEW
- For use with BuildPro Welding Tables
- Supports round stock in bends and elbows
- Holds up to 2.5 inch OD tubing
Price: $14.00
BuildPro Bend Rest with 120 degree angle - Medium
NEW
- For use with BuildPro Welding Tables
- Supports round stock in bends and elbows
- Holds up to 3 inch OD tubing
Price: $14.60
BuildPro V-Block with 120 degree angle
- For use with BuildPro Welding Tables
- Holds up to 2-1/2 inch round stock
Price: $17.40
Van Sant Enterprises, Inc.
- 75 Truman Road
- Pella, IA 50219
- Map & Directions
- Toll Free: 877-826-7268
- Phone: 641-628-3860
- Fax: 641-628-2614
- E-mail: [email protected]
- Business Hours: Mon-Fri 8am - 5pm CST
Connect with Us
Copyright © Van Sant Enterprises, Inc. All Rights Reserved.
Site by OneDogMedia
Terms & Conditions | Privacy Policy | Sitemap
Site by OneDogMedia
Terms & Conditions | Privacy Policy | Sitemap
