In-stock orders placed before 3 pm Central Time ship same day! Click here for details →
Strong Hand BuildPro Clamps & Accessories
BuildPro jig table clamps and accessories work with all Strong Hand BuildPro tables and are great for easy and repeatable fixturing for fabrication and welding. These accessories are based on a 5/8 inch (16mm) diameter round hole pattern as found on all BuildPro and CertiFlat Welding Tables.
Narrow by Sub Category
Searching...
BuildPro 360 degree Clamp, 20-1/2 x 5-1/2 inch
- For use with standard BuildPro Welding Tables
- Pivots 360 degrees
- Fits into 1-3/4 inch slots between plates
Price: $109.00
Strong Hand Articulated Arm Rest
- Steadies wrist for more accurate welds
- Decrease arm fatigue
- Anti-tipping magnetic base
- Articulating arm with swivel arm cup
Price: $97.50
BuildPro Table Grounding Clamp
NEW
- Easy twist-lock connection
- For 5/8 or 16mm holes
- Fits up to 3/0 cables
Price: $47.50
Strong Hand PowerBase Welding Ground Magnet
BEST SELLER
- 100 lb. holding force
- 500 amp load
- 360 degree cable rotation
Price: $60.50
Strong Hand Adjustable Wrist Rest
- Steadies wrist for more accurate welds
- Decrease arm fatigue
- Anti-tipping magnetic base
- Adjustable height up to 18.5 inches
Price: $80.00
Ground Hog Grounding Pliers
- 400 lb. holding force
- 450 amp load
- Clamps up to 2.5 inches
- Easy release lever
Price: $82.00
Magnetic Swiveling V-Jaws, Large
- Can be held to jig or table with base magnets or through bolt
- Swiveling magnets fit any size and shape
Price: $11.80
BuildPro 360 degree Clamp, 12-1/2 x 4-3/4 inch
- For use with standard BuildPro Welding Tables
- Pivots 360 degrees
- Fits into 1-3/4 inch slot between plates
Price: $68.50
Adjustable Height Hitch Mount Vise Plate for Rhino Cart
NEW
- For use with Rhino Cart
- Fits most vises with a 3 or 4 bolt pattern
- Under table mount design
- Removable receiver hitch
Price: $229.00
BuildPro Tube and Pipe Notcher
- Attaches directly to fixture tables with 5/8 holes with 2 inch spacing
- 1 to 2-1/2 inch capacity
- Notches up to 50 degrees
- Offset notch capable
Price: $276.00
Magnetic Swiveling V-Jaws, Small
- Can be held to jig or table with base magnets or through bolt
- Swiveling magnets fit any size and shape
Price: $8.10
BuildPro 360 degree Clamp, 8-1/2 x 4-3/4 inch
- For use with standard BuildPro Welding Tables
- Pivots 360 degrees
- Fits into 1-3/4 inch slot between plates
Price: $59.50
BuildPro V-Block with 120 degree angle
- For use with BuildPro Welding Tables
- Holds up to 2-1/2 inch round stock
Price: $17.40
BuildPro V-Block Spacer
- For use with BuildPro Welding Tables
- Fits welding tables with 5/8 inch holes
Price: $4.38
BuildPro Aluminum V-Block with 120 degree angle
- For use with BuildPro Welding Tables
- Fits round stock up to 2-1/2 inches in diameter
- Aluminum construction
Price: $8.20
BuildPro Setup Cone for Round Tubing or Pipe
NEW
- For use with BuildPro Welding Tables
- Includes 5/8 inch locating post and locking pin
- Center 3/8 to 1-3/4 inch tubing
Price: $25.80
BuildPro Bend Rest with 120 degree angle - Small
NEW
- For use with BuildPro Welding Tables
- Supports round stock in bends and elbows
- Holds up to 2.5 inch OD tubing
Price: $14.00
BuildPro Bend Rest with 120 degree angle - Medium
NEW
- For use with BuildPro Welding Tables
- Supports round stock in bends and elbows
- Holds up to 3 inch OD tubing
Price: $14.60
BuildPro Bend Rest with 150 degree angle - Large
NEW
- For use with BuildPro Welding Tables
- Supports round stock in bends and elbows
- Holds up to 8 inch OD tubing
Price: $16.00
Magnetic V-Pad Pack
- 2 large and 2 small v-pads
- Great for holding round, square and flat material
- Each pad contains 4 rare earth magnets
Price: $38.50
BuildPro Table Mount Clamp, 3 x 4 inch
- For use with BuildPro Welding Tables
- Removable 5/8 peg allows for many mounting options
- 3 inch reach
Price: $24.70
BuildPro Table Mount Clamp, 3-3/8 x 4 inch
- For use with BuildPro Welding Tables
- Removable 5/8 peg allows for many mounting options
- 3-3/8 inch reach
Price: $39.00
BuildPro Table Mount Clamp, 6-1/8 x 4-3/4 inch
BEST SELLER
- For use with BuildPro Welding Tables
- Removable 5/8 peg allows for many mounting options
- 6-1/8 inch reach
Price: $45.00
BuildPro V-Block with 90 degree angle
- For use with BuildPro Welding Tables
- Holds up to 2 inch diameter tubing
Price: $15.30
BuildPro Table Mount Clamp, 2 x 2-3/8 inch
- For use with BuildPro Welding Tables
- Removable 5/8 peg allows for many mounting options
- 2 inch reach
Price: $20.80
Van Sant Enterprises, Inc.
- 75 Truman Road
- Pella, IA 50219
- Map & Directions
- Toll Free: 877-826-7268
- Phone: 641-628-3860
- Fax: 641-628-2614
- E-mail: [email protected]
- Business Hours: Mon-Fri 8am - 5pm CST
Connect with Us
Copyright © Van Sant Enterprises, Inc. All Rights Reserved.
Site by OneDogMedia
Terms & Conditions | Privacy Policy | Sitemap
Site by OneDogMedia
Terms & Conditions | Privacy Policy | Sitemap
