In-stock orders placed before 3 pm Central Time ship same day! Click here for details →
1-3/4 Die
- Products (101)
Categories
Shop By BRAND
Shop By OFFERS
Ercolina Die Set, 1-3/4 inch OD x 6.7 inch CLR (170mm), 180 degrees, 50mm drive
…from the center rotation point of the die to the middle of the tubing. Max Degree of Bend - all dies can bend up to a full U-bend of 180 degrees…
Product Details »
Mittler Bros. 2500 Bender Die, 1-3/4 inch OD x 8 inch CLR, 180 degrees
…measured from the center rotation point of the die to the middle of the tubing. Max Degree of Bend - Dies can be purchased to bend up to 90 degrees or…
Product Details »
Mittler Bros. 900 Bender Die, 1-3/4 inch OD x 7 inch CLR, 90 degrees
…measured from the center rotation point of the die to the middle of the tubing. Max Degree of Bend - Dies can be purchased to bend up to 90 degrees or…
Product Details »
Baileigh Bender Die, 1-3/4 inch OD x 5.5 inch CLR, 180 degrees
…measured from the center rotation point of the die to the middle of the tubing. Max Degree of Bend - Dies can be purchased to bend up to 90 degrees or…
Product Details »
Huth Three Quarter Shoe, 1-3/4 inch OD
Two Huth Back Shoes are required along with one radius die to perform a bend on Huth Exhaust Benders. Three Quarter Shoes allow for extra clearance…
Product Details »
Replacement Plastic Counter Die Slide, 1-3/4 inch SQUARE
This replacement plastic counter die slide fits Baileigh 1-3/4 inch square tubing. (Excluding RDB-050 tooling) Actual product may vary in color and…
Product Details »
Huth Half Shoe, 1-3/4 inch OD
Two Huth Back Shoes are required along with one radius die to perform a bend on Huth Exhaust Benders. Half Shoes allow for extra clearance for close…
Product Details »
Ercolina Die Set, 1-3/4 inch OD x 7.5 inch CLR (190mm), 180 degrees, 50mm drive
…from the center rotation point of the die to the middle of the tubing. Max Degree of Bend - all dies can bend up to a full U-bend of 180 degrees…
Product Details »
795 V-Block Pusher for 1-1/2 to 1-3/4 inch Radius Dies
…for the use of custom radius dies from 1-1/2 to 1-3/4 CLR, to be used on Huth Exhaust Benders. Custom Radius Dies and Backing Shoes are sold…
Product Details »
Replacement Bronze Counter Die Insert, 1-3/4 inch OD - REV
…bronze counter die insert fits Baileigh 1-3/4 inch OD round tubing. (Excluding RDB-050 tooling) These inserts are meant for dies with CLR's 5 inches…
Product Details »
Ercolina Die Set, 1-3/4 inch OD x 3.9 inch CLR (100mm), 180 degrees, 50mm drive
…from the center rotation point of the die to the middle of the tubing. Max Degree of Bend - all dies can bend up to a full U-bend of 180 degrees…
Product Details »
Huth Reducing Die, 1-3/4 to 1-5/8 inch with 2 inch depth
This Huth reducer tooling is designed to reduce 1-3/4 inch x .065 inch tubing to fit inside itself. The reducing depth is 2 inches standard.
Product Details »
1-3/4 inch OD Notching Die
This 1-3/4 inch OD punch & die set features cutting edges made from A2 and D2 air hardened tool steels. Requires #1000 series standard housing.
Product Details »
Huth 3 inch Radius Die, 1-3/4 inch OD
…springback. Dies marked Full can bend up to 180 degrees but will need to be relieved to remove from die. Wrinkle Dies - Wrinkle dies provide a…
Product Details »
Huth 3 inch Radius Die, 1-3/4 inch OD, Wrinkle
…springback. Dies marked Full can bend up to 180 degrees but will need to be relieved to remove from die. Wrinkle Dies - Wrinkle dies provide a…
Product Details »
Huth 5 inch Radius Die, 1-3/4 inch OD, Wrinkle
…springback. Dies marked Full can bend up to 180 degrees but will need to be relieved to remove from die. Wrinkle Dies - Wrinkle dies provide a…
Product Details »
Replacement Plastic Counter Die Slide, 1-3/4 inch OD
This replacement plastic counter die slide fits Baileigh 1-3/4 inch OD round tubing. (Excluding RDB-050 tooling) Actual product may vary in color and…
Product Details »
Replacement Bronze Counter Die Insert, 1-3/4 inch OD
…bronze counter die insert fits Baileigh 1-3/4 inch OD round tubing. (Excluding RDB-050 tooling) These inserts are meant for dies with CLR's less…
Product Details »
Ercolina Radius Die, 1-3/4 inch OD x 5.1 inch CLR (130mm), 180 degrees, 50mm drive
This replacement radius former die fits Ercolina Tube Benders and can be used to bend the specified size tubing.
Product Details »
Ercolina Radius Die, 1-3/4 inch OD x 5.9 inch CLR (150mm), 180 degrees, 50mm drive
This replacement radius former die fits Ercolina Tube Benders and can be used to bend the specified size tubing.
Product Details »
Ercolina Radius Die, 1-3/4 inch OD x 6.7 inch CLR (170mm), 180 degrees, 50mm drive
This replacement radius former die fits Ercolina Tube Benders and can be used to bend the specified size tubing.
Product Details »
Baileigh Bender Die, 1-3/4 inch OD x 6.5 inch CLR, 180 degrees
…measured from the center rotation point of the die to the middle of the tubing. Max Degree of Bend - Dies can be purchased to bend up to 90 degrees or…
Product Details »
Baileigh RDB-050 Bender Die, 1-3/4 inch OD x 6 inch CLR, 90 degrees
…measured from the center rotation point of the die to the middle of the tubing. Max Degree of Bend - Dies can be purchased to bend up to 90 degrees or…
Product Details »
Baileigh RDB-050 Bender Die, 1-3/4 inch OD x 6.5 inch CLR, 90 degrees
…measured from the center rotation point of the die to the middle of the tubing. Max Degree of Bend - Dies can be purchased to bend up to 90 degrees or…
Product Details »
Van Sant Enterprises, Inc.
- 75 Truman Road
- Pella, IA 50219
- Map & Directions
- Toll Free: 877-826-7268
- Phone: 641-628-3860
- E-mail: [email protected]
- Business Hours: Mon-Fri 8am - 5pm CST
Connect with Us
Terms & Conditions | Privacy Policy | Sitemap
