In-stock orders placed before 3 pm Central Time ship same day! Click here for details →
Flange
- Products (114)
- Youtube (20)
- Facebook (14)
Categories
RAMS Hand Flanger, 20 gauge
…RAMS 2002 hand flanger is designed for forming a 7/32 inch right angle flange, for both inside and outside radii. This unit can also be used on duct…
Product Details »
RAMS Stand Alone Power Flanger with Auto Guide, 20 gauge
The RAMS 2007 power flanger will form a 7/32 inch right angle flange on either straight or curved pieces. The auto-adjust feature will self-adjust…
Product Details »
RAMS Auxiliary Machine
…form 1/4 inch right angle flange, 3/8 inch right angle flange, 1/2 inch right angle flange, 5/8 inch right angle flange, 5/8 inch standing seam, and…
Product Details »
ProLine Tapered T-Dolly - Small
…quality tools, built in the USA, ProLine Tapered T-Dollies can form flanges and edges by hammering (with hammer or slapper) the metal over the rounded…
Product Details »
3 inch Mittler Bros. Dimple Die
…dies are used to improve the strength and appearance of a panel and will flange (or flare) an existing hole in sheet metal up to .125 inch thick 4130…
Product Details »
HammerFab Tipping Die Set for 3/4 inch Shaft Bead Rollers
…HammerFab are the perfect tool for tipping or turning a straight or curved flange. The tipping die is one of the thinnest on the market for nice crisp…
Product Details »
MetalAce Straight T-Dolly - Large
…aluminum parts, our MetalAce Small Straight T-Dolly is used to form flanges and edges by hammering (with hammer or slapper) the metal over a rounded…
Product Details »
1-1/2 inch Mittler Bros. Dimple Die
…dies are used to improve the strength and appearance of a panel and will flange (or flare) an existing hole in sheet metal up to .125 inch thick 4130…
Product Details »
1 inch Mittler Bros. Dimple Die
…dies are used to improve the strength and appearance of a panel and will flange (or flare) an existing hole in sheet metal up to .125 inch thick 4130…
Product Details »
1/2 inch Mittler Bros. Dimple Die
…dies are used to improve the strength and appearance of a panel and will flange (or flare) an existing hole in sheet metal up to .125 inch thick 4130…
Product Details »
8 inch OD Contact Wheel for RadiusMaster Grinder
…on one face and has a flange with a height of approximately 1.66 inches on the other. Older machines will have two flanges with heights around 0.6…
Product Details »
Baileigh MH-19 Power Hammer
…but some popular applications are thumbnail shrinking, stretching, flanging, beading, offsetting, and louvers. The spring mode allows the dies to…
Product Details »Sale Price: $29999.00
Roper Whitney Style L Flanging Roll Set
Creates a Flange in sheet metal on Roper Whitney 622 Machines. Upper and Lower Roll Set. Designed for use on 22 ga steel.
Product Details »
Baileigh MH-37HD Power Hammer
…but some popular applications are thumbnail shrinking, stretching, flanging, beading, offsetting, and louvers. The spring mode allows the dies to…
Product Details »Sale Price: $81299.00
ProLine Tapered T-Dolly - Medium
…quality tools, built in the USA, ProLine Tapered T-Dollies can form flanges and edges by hammering (with hammer or slapper) the metal over the rounded…
Product Details »
ProLine Tapered T-Dolly - Set of 3
…quality tools, built in the USA, ProLine Tapered T-Dollies can form flanges and edges by hammering (with hammer or slapper) the metal over the rounded…
Product Details »Sale Price: $279.00
RAMS 2019 Powered Rotary Machine
…14 gauge powered rotary machine. Capable of forming beads, crimping, flanging, and many other profiles, this machine can handle the heaviest of bead…
Product Details »
Icengineworks 1-7/8 inch Block Adapter
…Block Adapters are used to start modeling by creating a connection point between the header flange or 1-7/8 inch exhaust tube and the modeling block.
Product Details »
Huth Custom Header Flange Expander Segment
…Expander Segments to reshape tubing for special header or manifold flanges. These segments fit onto any Huth Expander or Bender and are custom made…
Product Details »
ProLine Tapered T-Dolly - Large
…quality tools, built in the USA, ProLine Tapered T-Dollies can form flanges and edges by hammering (with hammer or slapper) the metal over the rounded…
Product Details »
2 inch Mittler Bros. Dimple Die
…dies are used to improve the strength and appearance of a panel and will flange (or flare) an existing hole in sheet metal up to .125 inch thick 4130…
Product Details »
3/4 inch Mittler Bros. Dimple Die
…dies are used to improve the strength and appearance of a panel and will flange (or flare) an existing hole in sheet metal up to .125 inch thick 4130…
Product Details »
Tennsmith Corner Notcher, 16 gauge
…piercing and knockout operations. This notcher can be configured with flange blades for forming reinforced corners in boxes, pans, and chassis…
Product Details »
Huth 1673 Portable Expander/Swager
…Swager/Expander equips you to form ball joints, slip joints, flares and flanges, and perform doming and reducing anywhere in your shop. This tubing…
Product Details »Sale Price: $7500.73
Van Sant Enterprises, Inc.
- 75 Truman Road
- Pella, IA 50219
- Map & Directions
- Toll Free: 877-826-7268
- Phone: 641-628-3860
- E-mail: [email protected]
- Business Hours: Mon-Fri 8am - 5pm CST
Connect with Us
Terms & Conditions | Privacy Policy | Sitemap
