In-stock orders placed before 3 pm Central Time ship same day! Click here for details →
5/8
- Products (295)
- Youtube (23)
- Facebook (10)
Categories
Shop By BRAND
10 x 2 inch Contact Wheel for Hardcore Maximizer
This 10 inch diameter contact wheel fits the Hardcore Maximizer belt grinder. Contact wheels have a 5/8 inch arbor.
Product Details »
5 x 2 inch Contact Wheel for Hardcore Grinder
This 5 inch diameter contact wheel fits Hardcore belt grinders with a 2 inch wide belt. Contact wheels have a 5/8 inch arbor.
Product Details »
8 x 2 inch Contact Wheel for Hardcore Grinder
This 8 inch diameter contact wheel fits Hardcore belt grinders with a 2 inch wide belt. Contact wheels have a 5/8 inch arbor.
Product Details »
6 inch Idler Wheel for Hardcore Grinder
This 6 inch diameter idler wheel fits Hardcore belt grinders with a 2 inch wide belt. Idler wheels have bearings and a 5/8 inch shaft.
Product Details »
8 inch Idler Wheel for Hardcore Grinder
This 8 inch diameter idler wheel fits Hardcore belt grinders with a 2 inch wide belt. Idler wheels have bearings and a 5/8 inch shaft.
Product Details »
RAMS 6-in-1 Tap-In Roll Set - for 2014 Aux machine
…angle flange, 1/2 inch right angle flange, 5/8 inch right angle flange, 5/8 inch standing seam, and 5/8 inch T-Connect. The rolls are made from…
Product Details »
ProLine Beading Dies .625 inch
…from S-7 tool steel and available in several shank sizes, these ProLine 5/8 inch Beading Dies will fit Pullmax, miniMax and a variety of other power…
Product Details »
BuildPro Eccentric Block, 1-1/2 x 1/2 inch
These BuildPro eccentric pads are a quick way to add an adjustable stop. For use with welding tables with 5/8 inch holes.
Product Details »
BuildPro Magnetic Rest, 1 x 1 inch, 4 pack
…BuildPro magnetic rests are 1 inch tall. They can be used on any flat surface, or inserted into the 5/8 inch holes on BuildPro tables and accessories.
Product Details »
Large Hole Saw Adapter for Baileigh TN-250
This large Hole Saw Arbor fits the Baileigh TN-250 and is used to mount hole saws with 5/8 x 18 threads.
Product Details »
Siegmund Imperial 28 Duo V-Prism, 1.57 inch dia x 120 degree
The Siegmund Imperial 28 Duo V-Prisms fit in Siegmund clamps with 5/8 inch spindles and also into 28mm holes. The 120 degree angle helps grip most…
Product Details »
Siegmund Imperial 28 Duo V-Prism, 1.5 inch OD x 120 degree, Polyamide
The Siegmund Imperial 28 Duo V-Prisms fit in Siegmund clamps with 5/8 inch spindles. The 120 degree angle helps grip most tubing.
Product Details »
Siegmund Imperial 28 Duo V-Prism, 1.5 inch OD x 120 degree, Aluminum
The Siegmund Imperial 28 Duo V-Prisms fit in Siegmund clamps with 5/8 inch spindles and also into 28mm holes. The 120 degree angle helps grip most…
Product Details »
BuildPro Stop, 1-1/2 inch OD
…a spacer on the Strong Hand BuildPro 5/8 welding tables. It is 1-1/2 inch OD x 2 inches tall and features a 5/8 inch hole for stacking or use along…
Product Details »
Strong Hand Cradle Angle Drill Press Vise, 3 inch
…force. Its base features two 5/8 clearance holes and two 4-inch shoulder slots for easy mounting on any 5/8 BuildPro fixture table or sawhorse.…
Product Details »
2 inch Aluminum Drive Wheel for Hardcore Grinder
…using the small wheel attachment for maximum belt wrap on the small wheel. It is 2 inches in diameter x 2 inches wide with a 5/8 inch center hole.
Product Details »
Trick Tools Dzus Dimple Tool
…each side of the panel and tighten the included draw bolt. Works with 5/8 inch diameter flat head dzus buttons. This dimple makes a .750 wide x .200…
Product Details »
BuildPro Table Mount Clamp, 3 x 4 inch
…threads holding a removable peg that fits any welding table with 5/8 holes. The push down to lock and pull up to release is good for repetitious…
Product Details »
BuildPro V-Block with 90 degree angle
…round stock up to 2 inches in diameter. They are designed to fit into the 5/8 holes of BuildPro tables and have a 5/16-18 threaded hole in the middle…
Product Details »
BuildPro V-Block with 120 degree angle
…holding round stock up to 2-1/2 inches. They are designed to fit into the 5/8 holes of BuildPro tables and have a 5/16-18 threaded hole in the middle…
Product Details »
BuildPro Inserta Clamp, 8-1/2 x 4 inch
…fast and easy clamping on your BuildPro table or any welding table with 5/8 inch holes. These clamps have an 8-1/2 inch height and 4-inch throat depth…
Product Details »
BuildPro T51650 T-Post Clamp
Place the Adjustable T-Post Clamp in any of the 5/8 holes on the BuildPro tabletop or heavy-duty riser block for both vertical and horizontal…
Product Details »
BuildPro Aluminum V-Block with 120 degree angle
…holding round stock up to 2-1/2 inches. They are designed to fit into the 5/8 holes of BuildPro tables and have a 5/16-18 threaded hole in the middle…
Product Details »
BuildPro Heavy Duty V-Block, 120 Degree Angle
…stock up to 3 inches. They have a removable peg designed to fit into the 5/8 inch holes of BuildPro tables as well as a bushing to bolt through an…
Product Details »
Van Sant Enterprises, Inc.
- 75 Truman Road
- Pella, IA 50219
- Map & Directions
- Toll Free: 877-826-7268
- Phone: 641-628-3860
- E-mail: [email protected]
- Business Hours: Mon-Fri 8am - 5pm CST
Connect with Us
Terms & Conditions | Privacy Policy | Sitemap
