In-stock orders placed before 3 pm Central Time ship same day! Click here for details →
Center Punch
- Products (46)
- Youtube (11)
- Facebook (5)
Categories
Shop By PRICE
Shop By OFFERS
KnKut 8-piece Step Point Drill Bit Set with 1/2 inch Shank, 9/16 to 1 inch
Eliminate the need to center punch or drill multiple pilot holes with these innovative Step Point Drill Bits from KnKut. This design reduces heat to…
Product Details »Sale Price: $493.78
3/4-16 Nielsen Transfer Screws, 12 pack
…into the threaded hole, place the blank over the punch and strike with a dead blow hammer. The center point of the hole as well as the diameter of the…
Product Details »
Magnetic Pipe Centering Head
…magnets in the legs for a good hold at any angle, a magnet to keep center punch from falling out, 360 degree rotatable bubble level with degree…
Product Details »
3/8-24 Nielsen Transfer Screws, 12 pack
…into the threaded hole, place the blank over the punch and strike with a dead blow hammer. The center point of the hole as well as the diameter of the…
Product Details »
Trick Tools Layout Tool Kit, 4 piece
The Trick Tools 4 piece Layout Kit features a Automatic Center Punch, Retractable Scribe, Retractable Knife, Ball Point Pen and Storage Pouch. Their…
Product Details »
7/16-20 Nielsen Transfer Screws, 12 pack
…into the threaded hole, place the blank over the punch and strike with a dead blow hammer. The center point of the hole as well as the diameter of the…
Product Details »
P-5.5, Wilton Prism Jaw Cap, 5-1/2 inch
…a 120 degree horizontal V-groove, 3 vertical V-grooves, and a 90 degree groove, perfect for center punching, light tapping and thread cutting.
Product Details »Sale Price: $73.69
1/4-28 Nielsen Transfer Screws, 12 pack
…into the threaded hole, place the blank over the punch and strike with a dead blow hammer. The center point of the hole as well as the diameter of the…
Product Details »
Spring Tools Rivet Removal Set, 2 piece
Spring Tools are the original hammerless technology and makes center punching a breeze to use with no additional tools needed. The Cold Chisel is…
Product Details »
5/8-18 Nielsen Transfer Screws, 12 pack
…into the threaded hole, place the blank over the punch and strike with a dead blow hammer. The center point of the hole as well as the diameter of the…
Product Details »
KnKut 29-piece Jobber Length Step Point Drill Bit Set, 1/16 to 1/2 inch
Eliminate the need to center punch or drill pilot holes with these innovative Step Point Drill Bits from KnKut. This design reduces heat to increase…
Product Details »Sale Price: $298.00
Short Slugger Cutters - ALL PRODUCTS
…make these ideal for use in small mills and drill presses. A center punch mark is all that is required to locate and start the spring-loaded…
Product Details »
1/4-20 Nielsen Transfer Screws, 12 pack
…into the threaded hole, place the blank over the punch and strike with a dead blow hammer. The center point of the hole as well as the diameter of the…
Product Details »
Hougen RotaCut Large OD Set, 6 cutters (7/8 to 1-1/2 inch)
…lasting up to 10 times longer than hole saws. Contains: 11005 arbor, center punch, extra pilots and 6 cutters (7/8, 1, 1-1/8, 1-1/4, 1-3/8, 1-1/2…
Product Details »Sale Price: $222.83
Hougen RotaCut Small OD Set, 7 cutters (5/16 to 3/4 inch)
…saw. This Small OD Kit contains 7 cutters (5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4 inch), extra pilots, 11088 arbor & center punch in a plastic case.
Product Details »Sale Price: $86.41
Hougen RotaCut Metric Master Set, 16 cutters (6mm to 20mm)
…Kit contains 16 cutters (6, 7, 8, 8.5, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20mm), extra pilots, 11088 arbor & center punch in a plastic case.
Product Details »Sale Price: $236.43
Punch and Die Mounting Kit with Centering Jig for Mittler Bros. Bench Press
The Mittler Bros. Punch and Die Mounting Kit with Centering Jig makes it easy to setup for repeatable punching on your parts. Great for small…
Product Details »
1/2-20 Nielsen Transfer Screws, 12 pack
…into the threaded hole, place the blank over the punch and strike with a dead blow hammer. The center point of the hole as well as the diameter of the…
Product Details »
Spring Tools Heavy-Duty Set, 4 piece
…Tools including an ultra heavy-duty center punch, self-centering punch, cold chisel, and a tapered punch. The body of these tools is 7/16 in diameter…
Product Details »
Hougen RotaCut Metric Set, 7 cutters (8mm to 20mm)
…bit or hole saw. This Metric Cutter Kit contains 7 cutters (8, 10, 12, 14, 16, 18, 20mm), extra pilots, 11088 arbor & center punch in a plastic case.
Product Details »Sale Price: $92.32
Hougen RotaCut Small OD Master Set, 16 cutters (1/4 to 3/4 inch)
…11/32, 3/8, 13/32, 7/16, 29/64, 15/32, 1/2, 17/32, 9/16, 5/8, 11/16, 23/32, 3/4 inch), extra pilots, 11088 arbor & center punch in a plastic case.
Product Details »Sale Price: $227.34
Trick Tools Layout Tool Kit, 3 piece
The Trick Tools 3 Piece Layout Kit features a Automatic Center Punch, Retractable Scribe, Retractable Knife and Storage Pouch. Their rugged anodized…
Product Details »
Van Sant Enterprises, Inc.
- 75 Truman Road
- Pella, IA 50219
- Map & Directions
- Toll Free: 877-826-7268
- Phone: 641-628-3860
- E-mail: [email protected]
- Business Hours: Mon-Fri 8am - 5pm CST
Connect with Us
Terms & Conditions | Privacy Policy | Sitemap
