In-stock orders placed before 3 pm Central Time ship same day! Click here for details →
Drill
- Products (869)
- Youtube (76)
- Facebook (29)
Categories
Shop By BRAND
Evolution EVOMAG42 Magnetic Drill
…It can use up to 1-5/8 inch (42mm) cutters; 1/2 inch (13mm) twist drills, and drill up to 2 inches deep. The powerful magnetic base has 2860 lbs of…
Product Details »
Roper Whitney XX Deep Throat Hand Punch Kit
…mild steel, aluminum, brass, copper, and more —saving tons of time over drilling. Featuring a robust forged frame and high-leverage compound action ,…
Product Details »
Fein 18v ASCM 18-4 QM AS 4-speed Cordless Drill/Driver, Bare Tool
…motor and QuickIN chuck system. Uncompromising power for drilling and tapping up to 1/2 inch and drilling with carbide hole saws up to 3-1/8 inch.
Product Details »Sale Price: $349.95
15/64 inch (A Drill Size) Round Punch and Die Set for Roper Whitney Large Presses
15/64 inch Round Punch and Die Set for Roper Whitney Large Presses. This tooling works in No. 127, 129, 130, 134, 150, 230, 231, and 331 Power Presses…
Product Details »
Fein Vario Twist Drill, 5/16 inch (3/8 UNC thread)
This Fein Vario twist drill is made of high speed steel with a TiAIN (titanium-aluminum-nitride) coating for long tool life (64 HRC). It uses a 7/16…
Product Details »
Fein JMU 404M Magnetic Drill
The JMU 404 M Mag Drill is the largest magnetic drill in the Fein lineup with a drilling capacity up to 4 inches diameter by 4 inches deep. It…
Product Details »Sale Price: $3499.95
Hougen Pipe Drilling Adapter for Magnetic Drills
The Pipe Drilling Adapter works great when needing to drill a centered hole through tube or pipe ranging from 3 inches OD to 12-3/4 inches OD. This…
Product Details »
KnKut 4-piece Step Point Drill Bit Set with 1/2 inch Shank, 9/16 to 1 inch
Eliminate the need to center punch or drill multiple pilot holes with these innovative Step Point Drill Bits from KnKut. This design reduces heat to…
Product Details »Sale Price: $202.81
1/4 inch (E Drill Size) Round Punch and Die Set for Roper Whitney No. 20
1/4 inch (E Drill Size) Round Punch and Die Set for Roper Whitney No. 20 (Type O)
Product Details »
KnKut 8-piece Step Point Drill Bit Set with 1/2 inch Shank, 9/16 to 1 inch
Eliminate the need to center punch or drill multiple pilot holes with these innovative Step Point Drill Bits from KnKut. This design reduces heat to…
Product Details »Sale Price: $444.74
Unibit Step Drill, TiN Coated, #3T
Unibit step drills from Irwin are the industry standard. Their single flute design results in a much more accurate hole than double flute bits. The…
Product Details »Sale Price: $42.51
1/2 inch Drive Socket Adapter for Fein Cordless Drill/Drivers
1/2 inch Drive Socket Adapter for Fein Drill/Drivers. Compatible with all FEIN cordless drill/drivers with QuickIN / QuickIN MAX interface.
Product Details »
Hex Bit Holder for Fein Cordless Drill/Drivers
1/4 inch hexagon bit holder with one-hand operation and powerful neodym magnet for Fein Drill/Drivers. Compatible with all FEIN cordless drill/drivers…
Product Details »
2 inch Arbor Extension for Slugger Mag Drills
This Fein 2 inch Arbor Extension features a 3/4 Weldon shank and fits most mag drills. The body of the arbor is 1-5/16.
Product Details »
Tapmatic Tapping Kit for Hougen HMD917/918, 920 Slot Drive Mag Drills
…recommended for use with swivel base drills. See required collets under the Accessories tab. *When using a two-speed drill always tap in low gear (250…
Product Details »
Fein 18v Brushless 4-Speed 1/2 inch Hammer Drill/Driver Top Set
…working applications including grinding, shearing, nibbling, drilling, core drilling, and oscillating! See the complete line of Fein cordless…
Product Details »Sale Price: $849.95
17/64 inch (H Drill Size) Round Punch and Die Set for Roper Whitney No. 20
17/64 inch (H Drill Size) Round Punch and Die Set for Roper Whitney No. 20 (Type O)
Product Details »
5/8 inch Drill Chuck for Hougen Magnetic Drills
5/8 inch chuck with key for Hougen Magnetic Drills
Product Details »
Evolution S28MAG Magnetic Drill
…simple to use coolant system, two-stage magnet, and included drill chuck for twist drill use. The S28Mag utilizes a standard 3/4 inch straight shank…
Product Details »
Strong Hand Drill Press Clamp
…Drill Press Clamp quickly locks and releases, making it ideal for repetitious clamping in a drill press, or even a welding table. Secure the Drill…
Product Details »
JET JMD-18 Mill/Drill with Power Downfeed
Mill Drills are great for light duty machine work, drilling, and tapping. The JET JMD-18PFN is a belt driven Mill/Drill and features a 2 hp 115/230v…
Product Details »Sale Price: $4553.10
Ellis Drill Press Chuck
…bearing drill press chuck fits 1/8 inch through 3/4 inch bits and features a #3 Morse Taper. The perfect accessory for the Ellis 9400 drill press!
Product Details »
JET JMD-45 Square Column Geared Head Mill/Drill
…and JMD-45GHPF Mill/Drills are great for medium-duty machine work, drilling, and tapping. The JMD-45 series Mill/Drills utilize a square column for…
Product Details »Sale Price: $7325.10
Hougen HMD2X2 Low Profile Magnetic Drill
Small enough to drill in places where even handheld electric drills can’t go, the HMD2X2 by Hougen has the power to cut holes up to 2-inch diameter…
Product Details »Sale Price: $2359.00
Van Sant Enterprises, Inc.
- 75 Truman Road
- Pella, IA 50219
- Map & Directions
- Toll Free: 877-826-7268
- Phone: 641-628-3860
- E-mail: [email protected]
- Business Hours: Mon-Fri 8am - 5pm CST
Connect with Us
Terms & Conditions | Privacy Policy | Sitemap
