In-stock orders placed before 3 pm Central Time ship same day! Click here for details →
7/16
- Products (110)
- Youtube (3)
- Facebook (2)
Categories
Shop By BRAND
Shop By OFFERS
Swag Off Road Medium Dimple Die Kit, 3 piece
…an H-Frame press, hydraulic punch driver, and even with a 3/4 inch or 7/16 draw bolt for dimpling on a vehicle, or after the fact. These Made in the…
Product Details »
Slugger Sheet Metal Cutter, 7/16 inch
These Slugger Small Hole Cutters are commonly used as spot weld cutters when removing welded on body panels during a restoration or repair. You will…
Product Details »
Clamping Kit for 7/16 and 1/2 inch T-Slot
…mounting to a wall or machine, so your clamping kit is always close by. Kit includes 3/8 inch OD studs for use with 7/16 and 1/2 inch wide T-slots.
Product Details »Sale Price: $214.49
HammerFab Master Dimple Die Set
…3/8 inch die = 1.480 inch OD (recess is approximately 1.090 inches) 7/16 inch die = 1.850 inch OD (recess is approximately 1.400 inches) 1/2 inch…
Product Details »Sale Price: $1699.95
Swag Off Road Pipe Size Dimple Die Kit, 5 piece
…an H-Frame press, hydraulic punch driver, and even with a 3/4 inch or 7/16 draw bolt for dimpling on a vehicle, or after the fact. The over all…
Product Details »
Hougen 17808 RotaLoc Plus Master Cutter Kit
…without stopping. This kit contains 14 RotaLoc Plus 1 inch depth cutters: 7/16 through 1-3/8 inch diameter, plus 2 pilots in a sturdy plastic case.
Product Details »Sale Price: $545.66
Roper Whitney No. 7A Punch and Die Starter Kit 1
…common sizes for the No. 7A punch. It includes a storage case with tonnage chart and 6 punch sizes including 1/8, 3/16, 1/4, 5/16, 3/8, and 7/16 inch.
Product Details »Sale Price: $220.00
Spring Tools Heavy-Duty Set, 4 piece
…punch, cold chisel, and a tapered punch. The body of these tools is 7/16 in diameter instead of the standard 5/16 inch for more weight. The heavy-duty…
Product Details »
HammerFab Large Flat Recess Dimple Die Set
…7/16 inch die = Approximately 1.4 inches 1/2 inch die = Approximately 1.7 inches The overall outside diameter of the dimple dies are as follows: 7/16…
Product Details »
Hougen-Ogura Portable Punch, 26.9 ton
…where a twist bit would normally be used. Punch sizes are available from 7/16 inch to 15/16 inch round holes and can handle up to 1/2 inch mild steel…
Product Details »
Fein Vario Tap Set, 5/16, 3/8, 1/2, and 5/8 UNC
This 4-piece tap set from Fein Power Tools uses a 7/16 (11mm) hex shank and works with the new Fein Vario Drive System. The taps are made from high…
Product Details »
Fein Mag Drill Imperial Twist Drill Kit
This Fein Imperial Twist Drill Kit makes drilling smaller holes possible without the chuck adapter. This kit includes 1/4, 5/16, 3/8, and 7/16 inch.
Product Details »
1/2 inch Collet for NotcHead Grip
This larger collet for the NotcHead Polishing Grip allows the tool to hold 7/16 and 1/2 inch bolts for polishing. A great accessory to make a valuable…
Product Details »Sale Price: $39.64
7/16 inch Punch and Die Set for Roper Whitney XX
7/16 inch Round Punch and Die Set for Roper Whitney XX Hand Punch (Type O)
Product Details »
7/16 inch Oversize Square Punch and Die for Piranha Ironworkers
7/16 inch Oversize Square Punch and Die for Piranha Ironworker models P-4, P-70, P-90, P-120, PII-88, PII-110, PII-140, SEPP-65, SEPP-88, SEPP-120,…
Product Details »
Deluxe Punch and Die Starter Kit for Piranha Ironworkers - DH Style
…15/16, 1, and 1-1/16 inch. Square: 3/8, 9/16, 5/8, and 3/4 inch Oblong: 7/16 x 1, 9/16 x 1, 3/4 x 1, and 13/16 x 1 inch This kit fits fit Piranha…
Product Details »Sale Price: $1443.75
7/16 inch Square Punch and Die for Piranha Ironworkers
7/16 inch Square Punch and Die for Piranha Ironworker models P-2, P-3, P-36, P-40, P-50, P-65, PII-35, PII-65, SEPP-35.
Product Details »
7/16 inch Square Punch & Die for METALpro Ironworkers
7/16 inch square punch and die set for METALpro Ironworkers. Standard die clearance is 1/32 inch.
Product Details »
Swag Off Road Large Dimple Die Kit, 2 piece
…an H-Frame press, hydraulic punch driver, and even with a 3/4 inch or 7/16 draw bolt for dimpling on a vehicle, or after the fact. These Made in the…
Product Details »
Swag Off Road Dimple Die Kit, 8 piece
…an H-Frame press, hydraulic punch driver, and even with a 3/4 inch or 7/16 draw bolt for dimpling on a vehicle, or after the fact. These Made in the…
Product Details »
7/16 inch Round Punch & Die for Porta-Punch
This 7/16 inch round punch & die set has a 1/32 die clearance and will fit the Cleveland Steel Tool Porta-Punch. Available in 5/16 inch to 13/16 inch…
Product Details »
7/16 inch Round Punch and Die for Piranha Ironworkers
7/16 inch Round Punch and Die for Piranha Ironworker models P-2, P-3, P-36, P-40, P-50, P-65, PII-35, PII-65, SEPP-35.
Product Details »
7/16 inch Square Punch & Die for Geka Ironworkers
7/16 inch Square Punch & Die for Geka Ironworkers. Fits Models 16 H, 20 H, 55A, 80A, Bendicrop 50, Bendicrop 60, Bendicrop 85, CEP 16, CEP 20, H 85 S,…
Product Details »
7/16 inch Square Punch and Die for Edwards Ironworkers
7/16 inch Square Punch and Die for Edwards, Hawthorne, Pittsburgh, and Cleveland Ironworkers. Fits in standard punch and die holder.
Product Details »
Van Sant Enterprises, Inc.
- 75 Truman Road
- Pella, IA 50219
- Map & Directions
- Toll Free: 877-826-7268
- Phone: 641-628-3860
- E-mail: [email protected]
- Business Hours: Mon-Fri 8am - 5pm CST
Connect with Us
Terms & Conditions | Privacy Policy | Sitemap
