Punching Drilling 69

Edwards Round Punch and Die Starter Kit

Edwards Punch and Die Starter Kit (8 sets from 3/16 to 1-1/16 inch)

Oblong Punch and Die with Urethane Stripper

Oblong Punch and Die with Urethane Stripper for Mittler Bros. Bench Press. Standard die clearance for 18-20 gauge mild steel or .060 aluminum. Please…

Hex Punch and Die with Urethane Stripper

Hex Punch and Die with Urethane Stripper for Mittler Bros. Bench Press. Standard die clearance for 18-20 gauge mild steel or .060 aluminum. Please…

Round Punch and Die with Urethane Stripper

Round Punch and Die with Urethane Stripper for Mittler Bros. Bench Presses. Standard die clearance for 18-20 gauge mild steel or .060 aluminum. Please…

Square Punch and Die with Urethane Stripper

Square Punch and Die with Urethane Stripper for Mittler Bros. Bench Press. Standard die clearance for 18-20 gauge mild steel or .060 aluminum. Please…

Rectangle Punch and Die with Urethane Stripper

Oblong Punch and Die with Urethane Stripper for Mittler Bros. Bench Press. Standard die clearance for 18-20 gauge mild steel or .060 aluminum. Please…

Roper Whitney No. 218 Bench Punch

…Roper Whitney No. 218 Bench Punch is great for prototyping or the job shop making small production runs. This punch features an adjustable die shoe…

Edwards Punch & Dies - ALL PRODUCTS

These punch and die sets fit Edwards Ironworkers. Many sizes and shapes are available. Click the button below to see the full list.

Mittler Bros. 2-5/8 inch Gauge Hole Punch

This Gauge Hole Punch can be used with a Mittler Bros. Bench Press or by tightening the supplied bolt with a common wrench or ratchet. Good for up to…

Mittler Bros. 2-1/16 inch Gauge Hole Punch

This Gauge Hole Punch can be used with a Mittler Bros. Bench Press or by tightening the supplied bolt with a common wrench or ratchet. Good for up to…

Mittler Bros. 2-1/4 inch Gauge Hole Punch

This Gauge Hole Punch can be used with a Mittler Bros. Bench Press or by tightening the supplied bolt with a common wrench or ratchet. Good for up to…

Mittler Bros. 3-3/8 inch Gauge Hole Punch

This Gauge Hole Punch can be used with a Mittler Bros. Bench Press or by tightening the supplied bolt with a common wrench or ratchet. Good for up to…

Mittler Bros. 3-1/8 inch Gauge Hole Punch

This Gauge Hole Punch can be used with a Mittler Bros. Bench Press or by tightening the supplied bolt with a common wrench or ratchet. Good for up to…

Urethane Punch Stripper for Scotchman 12012-24M

Punch Station Slug Receptacle for Edwards Ironworkers

Catch slugs in one convenient spot before they hit the ground with the Slug Receptacle for Edwards 40 - 60 ton ironworkers.

1/4 x 3/8 inch Oblong Punch and Die for Punch-Pro 76000PR

This punch and die set fit the Hougen-Ogura Punch-Pro 76000PR 18v cordless punch and is rated to punch up to 1/4 inch thick mild steel.

1/4 x 1/2 inch Oblong Punch and Die for Punch-Pro 76000PR

This punch and die set fit the Hougen-Ogura Punch-Pro 76000PR 18v cordless punch and is rated to punch up to 1/4 inch thick mild steel.

11/32 x 1/2 inch Oblong Punch and Die for Punch-Pro 76000PR

This punch and die set fit the Hougen-Ogura Punch-Pro 76000PR 18v cordless punch and is rated to punch up to 1/4 inch thick mild steel.

23/64 x 17/32 inch Oblong Punch and Die for Punch-Pro 76000PR

This punch and die set fit the Hougen-Ogura Punch-Pro 76000PR 18v cordless punch and is rated to punch up to 1/4 inch thick mild steel.

3/8 x 19/32 inch Oblong Punch and Die for Punch-Pro 76000PR

This punch and die set fit the Hougen-Ogura Punch-Pro 76000PR 18v cordless punch and is rated to punch up to 1/4 inch thick mild steel.

7/16 x 5/8 inch Oblong Punch and Die for Punch-Pro 76000PR

This punch and die set fit the Hougen-Ogura Punch-Pro 76000PR 18v cordless punch and is rated to punch up to 1/4 inch thick mild steel.

7/16 x 5/8 inch Oblong Punch and Die for Punch-Pro 75006PR

This punch and die set will fit the Hougen-Ogura Punch-Pro 75006PR portable punch. Different die options are available for varying thickness material…

1/2 x 3/4 inch Oblong Punch and Die for Punch-Pro 75006PR

This punch and die set will fit the Hougen-Ogura Punch-Pro 75006PR portable punch. Different die options are available for varying thickness material…

9/16 x 13/16 inch Oblong Punch and Die for Punch-Pro 75006PR

This punch and die set will fit the Hougen-Ogura Punch-Pro 75006PR portable punch. Different die options are available for varying thickness material…