In-stock orders placed before 3 pm Central Time ship same day! Click here for details →
Hole Punch And Die
- Products (30)
- Youtube (4)
- Facebook (2)
Shop By BRAND
Shop By PRICE
Shop By OFFERS
Roper Whitney XX Deep Throat Hand Punch Kit
…a clean round hole. Easy to carry or fit in a tool box, the XX Kit comes in a plastic case with an assortment of punches and dies. Hardened, machined…
Product Details »
Work Table for Roper Whitney No. 218 Punch
…Roper Whitney No. 218 bench punch makes lining up repeat holes much easier. It simply attaches on top of the die shoe and features three adjustable…
Product Details »
Swag Off Road Medium Dimple Die Kit, 3 piece
…male and female dies, allowing them to be used in a variety of different ways. These dies can be used in an H-Frame press, hydraulic punch driver, and…
Product Details »
Roper Whitney No. 16 Medium Duty Bench Punch
…to punch a 9/16 inch hole through 1/8 inch mild steel plate! The lower die shoe is adjustable to permit the proper alignment of punches and dies for…
Product Details »
Large Punch & Die Starter Set for METALpro Ironworkers, 8 piece
Save with this 8-piece basic punch and die starter kit for the METALpro Ironworkers. This starter kit for large holes includes 25/32, 13/16, 27/32,…
Product Details »
Roper Whitney No. 17 Medium Duty Bench Punch
…versatile punch. The punch generates 5 tons of pressure, enough to punch a 1/2 inch hole in 1/8 inch mild steel. At the same time, the die shoe is…
Product Details »
Swag Off Road Large Dimple Die Kit, 2 piece
…male and female dies, allowing them to be used in a variety of different ways. These dies can be used in an H-Frame press, hydraulic punch driver, and…
Product Details »
Shaved Die Holder for METALpro Ironworkers
…users to punch holes closer to the web of angle iron. The channels in the base of the die holder allow for further adjustment of your hole punch. This…
Product Details »
Roper Whitney No. 218 Bench Punch
…tolerance dies. The No. 218 boasts the largest throat depth in the Roper Whitney lineup at 12-1/4 inches and can punch up to a 2-inch round hole with…
Product Details »
Swag Off Road Dimple Die Kit, 8 piece
…male and female dies, allowing them to be used in a variety of different ways. These dies can be used in an H-Frame press, hydraulic punch driver, and…
Product Details »
Swag Off Road Pipe Size Dimple Die Kit, 5 piece
This dimple die set from Swag Off Road matches up with commonly available electricians knockout punch sizes. Swag Offroad Dimple Dies are CNC machined…
Product Details »
Additonal Punch and Die Holder for JET 45 ton
…If needing to punch two different sizes holes or shapes at a time helps your project, here's your answer. This additional punch and die holder fits…
Product Details »
Swag Off Road Small Dimple Die Kit, 3 piece
…male and female dies, allowing them to be used in a variety of different ways. These dies can be used in an H-Frame press, hydraulic punch driver, and…
Product Details »
Small Punch & Die Starter Set for METALpro Ironworkers, 8 piece
Save with this 8-piece basic punch and die starter kit for the METALpro Ironworkers. This starter kit for smaller holes includes 9/32, 11/32, 13/32,…
Product Details »
Eckold LSW1K Punching Tool
…of punching holes in up to 14 gauge (2.0mm) mild steel or .079 inch (2.0mm) aluminum. Punches available from 3.2mm up to 8.5mm. (Please call for die…
Product Details »
Work Table for Roper Whitney No. 16 and 17 Punches
…Whitney No. 16 and 17 bench punches makes lining up repeat holes much easier. It simply attaches on top of the die shoe and features three adjustable…
Product Details »
Swag Off Road Knock Out Punch Kit, 7 piece
…are an economical way to punch holes for the fabricator on a budget. Swag Offroad punches also partner well with our line-up of Swag dimple dies!
Product Details »
Eckold LSW1SSP Punching Tool
…of punching holes in up to 14 gauge (2.0mm) mild steel or .079 inch (2.0mm) aluminum. Punches available from 3.2mm up to 8.5mm. (Please call for die…
Product Details »
Channel Die Block for Piranha Ironworkers
…die holder allows for maximum clearance and can punch a hole in 3 to 6 inch standard weight channel. The Channel Die Block replaces the standard die…
Product Details »
Gauging Table Kit for Edwards 25 ton Ironworker
…precise, repeatable standard or oversized holes. The table bolts to late model standard or oversize Pedestal Die Tables and includes one short and one…
Product Details »Sale Price: $384.99
Cleveland Steel Tool Porta-Punch, 35 ton
…being punched and then strips the material from the punch so you’re ready for the next hole in seconds. The Porta-Punch is ideal for punching bus…
Product Details »
Channel Die Block for Piranha P50 Ironworkers
…die holder allows for maximum clearance and can punch a hole in 3 to 6 inch standard weight channel. The Channel Die Block replaces the standard die…
Product Details »
241 Punch Assembly for Edwards 40 - 120 ton (1-9/16 to 4 inch Round)
…accommodates punch and dies in standard rounds or custom shapes from 1-9/16 through 4 inch. We have seen 241 tooling used to punch access holes and…
Product Details »Sale Price: $2243.00
Roper Whitney No. 7A Punch and Die Starter Kit 2
…tonnage chart and 6 punch sizes including 5/32, 7/32, 9/32, 11/32, and 13/32 inch. The 1/32 clearance is perfect for creating holes for most standard…
Product Details »Sale Price: $184.00
Van Sant Enterprises, Inc.
- 75 Truman Road
- Pella, IA 50219
- Map & Directions
- Toll Free: 877-826-7268
- Phone: 641-628-3860
- Fax: 641-628-2614
- E-mail: [email protected]
- Business Hours: Mon-Fri 8am - 5pm CST
Connect with Us
Site by OneDogMedia
Terms & Conditions | Privacy Policy | Sitemap
