In-stock orders placed before 3 pm Central Time ship same day! Click here for details →
Used Dies
- Products (1668)
- Youtube (71)
- Facebook (23)
Categories
Shop By BRAND
Stripper Reducing Plate for Edwards 65 -100 ton
…that minimizes distortion in thinner gauge material when using smaller punch and dies. This accessory is easily applied to late model stripper bars…
Product Details »Sale Price: $145.19
Stripper Reducing Plate for Edwards 120 ton
…that minimizes distortion in thinner gauge material when using smaller punch and dies. This accessory is easily applied to late model stripper bars…
Product Details »Sale Price: $145.19
Stripper Reducing Plate for Edwards 100 ton Deluxe
…that minimizes distortion in thinner gauge material when using smaller punch and dies. This accessory is easily applied to late model stripper bars…
Product Details »Sale Price: $145.19
Small Radius Bend Adapter for Pro-Tools MB-105
…adapter (SRBA) is designed for use on the Pro-Tools MB-105 and MB-105HD when using 2 or 2-1/2 inch radius dies or whenever manual bending of small…
Product Details »
Roper Whitney No. 24 Heavy Duty Bench Punch
…to punch angles, channels, and flanged parts. Recommended for 10 gauge and thicker material, the No. 24 uses standard No. 20 punches and dies.
Product Details »
Huth Spacer, Full Shoe
…spacer is used between the gate and the back shoe on a Huth exhaust bender to move the back shoe closer to the radius die. This is useful to gain…
Product Details »
Huth Spacer, Half Shoe
…spacer is used between the gate and the back shoe on a Huth exhaust bender to move the back shoe closer to the radius die. This is useful to gain…
Product Details »
Mittler Bros. Oval Forming Set (3 piece)
…steel, 14 gauge aluminum, or 19 gauge stainless steel. These die set works best when used with the Mittler Bros 2200-M, 2200-H, or 2210-HD bench…
Product Details »Sale Price: $985.00
Mittler Bros. Triangle Forming Set (3 piece)
…steel, 14 gauge aluminum, or 19 gauge stainless steel. These die set works best when used with the Mittler Bros 2200-M, 2200-H, or 2210-HD bench…
Product Details »Sale Price: $985.00
8 inch Press Brake for METALpro Ironworkers
…with a 90-degree top punch and 1-1/2 inch bottom v-die for up to 1/4 inch mild steel capacity. It can be used in all of the METALpro Ironworkers.
Product Details »
Stripper Reducing Plate for Edwards 40 - 60 ton
…that minimizes distortion in thinner gauge material when using smaller punch and dies. This accessory is easily applied to late model stripper bars…
Product Details »Sale Price: $145.19
JMR Industrial Die, 2 inch NPS (2.375 OD) x 6 inch CLR, 240 degrees
This die fits JMR Tube Benders and can be used to bend the specified size tubing. OD - refers to actual Outside Diameter of the tube as measured with…
Product Details »
Mittler Bros. Hand-Held Shrinker/Stretcher
…patch pieces for such areas as rear wheel arches, dog legs, window edges, and trunk edges. The 590-MB uses Lancaster shrinker/stretcher dies.
Product Details »
Mittler Bros. Round Forming Set, 1/2 to 2-1/2 inch (9 piece)
…steel, 14 gauge aluminum, or 19 gauge stainless steel. These die set works best when used with the Mittler Bros 2200-M, 2200-H, or 2210-HD bench…
Product Details »Sale Price: $575.00
Urethane Stripper Assembly for Scotchman 9012-24M
…end of the punching cycle. This minimizes any distortion from punching. It is used on the 9012-24M and works with punch and die sets up to 1-1/4 inch.
Product Details »
Huth 3-1/2 inch Radius Die, Flat Stock
…springback. Dies marked Full can bend up to 180 degrees but will need to be relieved to remove from die. Wrinkle Dies - Wrinkle dies provide a…
Product Details »
Huth 3 inch Radius Die, 40mm OD
…springback. Dies marked Full can bend up to 180 degrees but will need to be relieved to remove from die. Wrinkle Dies - Wrinkle dies provide a…
Product Details »
Huth 3 inch Radius Die, 45mm OD
…springback. Dies marked Full can bend up to 180 degrees but will need to be relieved to remove from die. Wrinkle Dies - Wrinkle dies provide a…
Product Details »
Huth 3 inch Radius Die, 50mm OD
…springback. Dies marked Full can bend up to 180 degrees but will need to be relieved to remove from die. Wrinkle Dies - Wrinkle dies provide a…
Product Details »
Huth 4 inch Radius Die, 40mm OD
…springback. Dies marked Full can bend up to 180 degrees but will need to be relieved to remove from die. Wrinkle Dies - Wrinkle dies provide a…
Product Details »
Huth 4 inch Radius Die, 45mm OD
…springback. Dies marked Full can bend up to 180 degrees but will need to be relieved to remove from die. Wrinkle Dies - Wrinkle dies provide a…
Product Details »
Huth 4 inch Radius Die, 50mm OD
…springback. Dies marked Full can bend up to 180 degrees but will need to be relieved to remove from die. Wrinkle Dies - Wrinkle dies provide a…
Product Details »
Huth 4 inch Radius Die, 55mm OD
…springback. Dies marked Full can bend up to 180 degrees but will need to be relieved to remove from die. Wrinkle Dies - Wrinkle dies provide a…
Product Details »
Huth 4 inch Radius Die, 60mm OD
…springback. Dies marked Full can bend up to 180 degrees but will need to be relieved to remove from die. Wrinkle Dies - Wrinkle dies provide a…
Product Details »
Van Sant Enterprises, Inc.
- 75 Truman Road
- Pella, IA 50219
- Map & Directions
- Toll Free: 877-826-7268
- Phone: 641-628-3860
- Fax: 641-628-2614
- E-mail: [email protected]
- Business Hours: Mon-Fri 8am - 5pm CST
Connect with Us
Site by OneDogMedia
Terms & Conditions | Privacy Policy | Sitemap
