Trick-Tools

1 Inch Die

View: Grid | List
See All Products
Pro-Tools Brute Bender Die, 1 inch OD x 3.5 inch CLR, 180 degrees

Pro-Tools Brute Bender Die, 1 inch OD x 3.5 inch CLR, 180 degrees

…measured from the center rotation point of the die to the middle of the tubing.Max Degree of Bend - Dies can be purchased to bend up to 110 degrees or…

Product Details »
Price: $349.75
1 inch NPS Notching Die

1 inch NPS Notching Die

This 1 inch PIPE punch & die set features cutting edges made from A2 and D2 air hardened tool steels. Requires #1000 series standard housing.

Product Details »
Price: $470.00
1 inch OD Notching Die

1 inch OD Notching Die

This 1 inch OD punch & die set features cutting edges made from A2 and D2 air hardened tool steels. Requires #1000 series standard housing.

Product Details »
Price: $520.00
Related Categories: Trick-tools

1 inch JMR Dimple Die

1 inch JMR Dimple Die

dies from JMR are used to improve the strength and appearance of a panel and will flange (or flare) an existing hole in sheet metal up to .125 inch

Product Details »
Price: $75.00
Related Categories: Dimple

Covell 1 inch Round-Over Die, Mittler Style

Covell 1 inch Round-Over Die, Mittler Style

NEW

…heat treated steel, these dies can handle up to 16 gauge mild steel. Designed for Mittler bead rollers with a 3/4 inch shaft, these rolls fit other…

Product Details »
Price: $105.00

Covell 1 inch Round-Over Die, Pexto Style

Covell 1 inch Round-Over Die, Pexto Style

NEW

Covell Rounding-Over Dies are great for turning a radiused edge on sheet metal panels. The built in back stop allows for a smooth and consistent…

Product Details »
Price: $90.00

Ercolina 1 inch NPS Counter Die

Ercolina 1 inch NPS Counter Die

Ercolina 1 inch NPS replacement Counter-bend Die

Product Details »
Price: $220.00
Ercolina 1 inch OD Counter Die

Ercolina 1 inch OD Counter Die

Ercolina 1 inch OD replacement Counter-bend Die

Product Details »
Price: $210.00
Ercolina 1 inch SQUARE Counter Die

Ercolina 1 inch SQUARE Counter Die

Ercolina 1 inch SQUARE replacement Counter-bend Die

Product Details »
Price: $340.00
1 inch OD Die for Mittler Bros. Hydraulic Tube Notcher

1 inch OD Die for Mittler Bros. Hydraulic Tube Notcher

1 inch Die for Mittler Bros. Standard Hydraulic Tube Notcher

Product Details »
Price: $205.00
Huth Swage Die, 1 inch

Huth Swage Die, 1 inch

This Huth swage tooling is designed to expand 1 inch x .065 inch tubing to fit over other 1 inch OD material.

Product Details »
Price: $59.00
Related Categories: Tube Expander

1 inch NPS Edwards Notching Die

1 inch NPS Edwards Notching Die

SALE

Edwards 1 inch PIPE Notching Die. Fits in Edwards Notcher Housing.

Product Details »
Price: $670.00
Sale Price: $549.00
1 inch NPS Scotchman Notching Die

1 inch NPS Scotchman Notching Die

This 1 inch PIPE punch & die set features cutting edges made from A2 and D2 air hardened tool steels. It mounts in the Scotchman PIPE notcher housing.

Product Details »
Price: $596.00
1 inch Mittler Bros. Dimple Die

1 inch Mittler Bros. Dimple Die

NEW

…dimple dies are used to improve the strength and appearance of a panel and will flange (or flare) an existing hole in sheet metal up to .125 inch

Product Details »
Price: $79.00
Huth 3 inch Radius Die, 1 inch OD

Huth 3 inch Radius Die, 1 inch OD

…of the die to the middle of the tubing.Max Degree of Bend - Dies can bend up to the specified angle depending on material springback. Dies marked Full…

Product Details »
Price: $212.00
Huth 4 inch Radius Die, 1 inch OD

Huth 4 inch Radius Die, 1 inch OD

…of the die to the middle of the tubing.Max Degree of Bend - Dies can bend up to the specified angle depending on material springback. Dies marked Full…

Product Details »
Price: $257.50
Huth 5 inch Radius Die, 1 inch OD

Huth 5 inch Radius Die, 1 inch OD

…of the die to the middle of the tubing.Max Degree of Bend - Dies can bend up to the specified angle depending on material springback. Dies marked Full…

Product Details »
Price: $342.00
Huth 3 inch Radius Die, 1 inch SQUARE

Huth 3 inch Radius Die, 1 inch SQUARE

…of the die to the middle of the tubing.Max Degree of Bend - Dies can bend up to the specified angle depending on material springback. Dies marked Full…

Product Details »
Price: $331.50
Huth 4 inch Radius Die, 1 inch SQUARE

Huth 4 inch Radius Die, 1 inch SQUARE

…of the die to the middle of the tubing.Max Degree of Bend - Dies can bend up to the specified angle depending on material springback. Dies marked Full…

Product Details »
Price: $400.00
1 inch Round Punch and Die for Edwards Ironworkers

1 inch Round Punch and Die for Edwards Ironworkers

1 inch Round Punch and Die for Edwards, Hawthorne, Pittsburgh, and Cleveland Ironworkers. Fits in standard punch and die holder.

Product Details »
Price: $39.00
1 inch Round Punch and Die for Piranha Ironworkers

1 inch Round Punch and Die for Piranha Ironworkers

1 inch Round Punch and Die for Piranha Ironworker models P-2, P-3, P-36, P-40, P-50, P-65, PII-35, PII-65, SEPP-35.

Product Details »
Price: $39.00
2-1/2 inch NPS Notching Die

2-1/2 inch NPS Notching Die

This 2-1/2 inch PIPE punch & die set features cutting edges made from A2 and D2 air hardened tool steels. Requires #1000-1 series standard housing.

Product Details »
Price: $1275.00
3-1/4 inch OD Notching Die

3-1/4 inch OD Notching Die

This 3-1/4 inch OD punch & die set features cutting edges made from A2 and D2 air hardened tool steels. Requires #1000-1 series standard housing.

Product Details »
Price: $1625.00
3-1/2 inch OD Notching Die

3-1/2 inch OD Notching Die

This 3-1/2 inch OD punch & die set features cutting edges made from A2 and D2 air hardened tool steels. Requires #1000-1 series standard housing.

Product Details »
Price: $1625.00