In-stock orders placed before 3 pm Central Time ship same day! Click here for details →
Metalpro
- Products (170)
- Youtube (2)
Shop By BRAND
Shop By OFFERS
METALpro 40 ton Ironworker
…mild steel). Metalpro’s dual footswitch design controls the hydraulic power system. This machine comes standard with Metalpro’s 3-in-1 combination…
Product Details »Sale Price: $4488.75
Small Punch & Die Starter Set for METALpro Ironworkers, 8 piece
Save with this 8-piece basic punch and die starter kit for the METALpro Ironworkers. This starter kit for smaller holes includes 9/32, 11/32, 13/32,…
Product Details »
METALpro 50 ton Ironworker
…mild steel). Metalpro’s dual footswitch design controls the onboard hydraulic power system. This machine includes Metalpro’s 3-in-1 combination…
Product Details »Sale Price: $7220.00
1/4 x 1/2 inch Oblong Punch & Die for METALpro Ironworkers
1/4 x 1/2 inch oblong punch and die set for METALpro Ironworkers. Standard die clearance is 1/32 inch.
Product Details »
Heavy-Duty Notcher Attachment for METALpro Ironworkers
The METALpro rectangle notcher is used to take a 1-3/4 inch wide by up to 2-inch deep notch out of 1/4 inch and under plate. It can also be used to…
Product Details »
12 inch Press Brake for METALpro Ironworkers
The METALpro 12-inch brake comes standard with 90-degree top punch and 1-1/2 inch bottom vee die for up to 1/4 inch mild steel capacity. This brake…
Product Details »
METALpro Punch & Dies - ALL PRODUCTS
These punch and die sets fit all Metalpro ironworkers.
Product Details »
METALpro 45 ton Ironworker
…mild steel). Metalpro’s dual footswitch design controls the hydraulic power system. This machine comes standard with Metalpro’s 3-in-1 combination…
Product Details »Sale Price: $6151.25
METALpro 40 ton Basic Ironworker
The MP4000 is a fully capable ironworker, offered in its most basic form. Customize this machine with the tooling you need and don't pay for options…
Product Details »Sale Price: $3206.25
Large Punch & Die Starter Set for METALpro Ironworkers, 8 piece
Save with this 8-piece basic punch and die starter kit for the METALpro Ironworkers. This starter kit for large holes includes 25/32, 13/16, 27/32,…
Product Details »
Bolt Size Punch & Die Starter Set for METALpro Ironworkers, 8 piece
Save with this 8-piece basic punch and die starter kit for the METALpro Ironworkers. This starter kit is specifically made for a tight clearance on…
Product Details »
9/16 x 1-1/4 inch Oblong Punch & Die for METALpro Ironworkers
9/16 x 1-1/4 inch oblong punch and die set for METALpro Ironworkers. Standard die clearance is 1/32 inch.
Product Details »
Pipe Notcher Housing for METALpro Ironworkers
The METALpro pipe notcher housing can be used in the 40, 45, and 50 ton Ironworkers. This attachment operates in the punch station of the Ironworker…
Product Details »
3/8 x 3/4 inch Oblong Punch & Die for METALpro Ironworkers
3/8 x 3/4 inch oblong punch and die set for METALpro Ironworkers. Standard die clearance is 1/32 inch.
Product Details »
Shaved Die Holder for METALpro Ironworkers
The METALpro Shaved Die Holder allows users to punch holes closer to the web of angle iron. The channels in the base of the die holder allow for…
Product Details »
Punch Assembly for METALpro Ironworkers
Punch station assembly includes a ram, ram bushing, retaining nut, die holder, two strippers, two links, and hardware. This assembly allows for the…
Product Details »
11/16 inch Round Punch & Die for METALpro Ironworkers
11/16 inch round punch and die set for METALpro Ironworkers. Standard die clearance is 1/32 inch.
Product Details »
9/16 inch Round Punch & Die for METALpro Ironworkers
9/16 inch round punch and die set for METALpro Ironworkers. Standard die clearance is 1/32 inch.
Product Details »
Punch Station Plate for METALpro Ironworkers
This punch gauging table attaches to METALpro 45 and 50 ton Ironworkers. This table gives the operator the ability to set up stops which will improve…
Product Details »
Limit Switch Kit for METALpro Ironworkers
The METALpro limit switch kit controls the downward stroke to eliminate bottoming out tooling on pressing applications.
Product Details »
Back Stop for METALpro Ironworker Press Brakes
This back gauge fits the METALpro 8 and 12 inch Press Brake Attachment and has an adjustable stop allowing for up to 19 inches. This back stop ensures…
Product Details »
1 inch Round Punch & Die for METALpro Ironworkers
1 inch round punch and die set for METALpro Ironworkers. Standard die clearance is 1/32 inch.
Product Details »
High Clearance Wheel Kit for METALpro Ironworkers
…it out of the way with this Wheel Kit for METALpro Ironworkers. This wheel kit fits all METALpro Ironworkers and includes mounts and dual heavy-duty…
Product Details »
11/16 inch Hexagonal Punch & Die for METALpro Ironworkers
11/16 inch hexagonal punch and die set for METALpro Ironworkers. Standard die clearance is 1/32 inch.
Product Details »
Van Sant Enterprises, Inc.
- 75 Truman Road
- Pella, IA 50219
- Map & Directions
- Toll Free: 877-826-7268
- Phone: 641-628-3860
- Fax: 641-628-2614
- E-mail: [email protected]
- Business Hours: Mon-Fri 8am - 5pm CST
Connect with Us
Site by OneDogMedia
Terms & Conditions | Privacy Policy | Sitemap
