In-stock orders placed before 3 pm Central Time ship same day! Click here for details →
1.5 Die
- Products (76)
- Youtube (21)
- Facebook (3)
Categories
Shop By BRAND
Shop By OFFERS
METALpro XP 45 ton Ironworker
…thinner mild steel). METALpro’s dual foot switch design controls the 1.5hp Baldor, 2 stage gear pump which is up to 3 times faster than standard…
Product Details »Sale Price: $12373.75
ProLine Planishing Hammer Bottom Die 1.5 x 0.78R
This ProLine Planishing Bottom Die is made from polished and hardened S7 tool steel, with a .078 inch radius and 1-1/2 inch diameter face.
Product Details »
ProLine Planishing Hammer Bottom Die 1.5 x 9R
This ProLine Planishing Bottom Die is made from polished and hardened S7 tool steel, with a 9 inch radius and 1-1/2 inch diameter face.
Product Details »
ProLine Planishing Hammer Bottom Die 1.5 x 12R
This ProLine Planishing Bottom Die is made from polished and hardened S7 tool steel, with a 12 inch radius and 1-1/2 inch diameter face.
Product Details »
ProLine Planishing Hammer Bottom Die 1.5 x 36R
This ProLine Planishing Bottom Die is made from polished and hardened S7 tool steel, with a 36 inch radius and 1-1/2 inch diameter face.
Product Details »
ProLine Planishing Hammer Bottom Die 1.5 x 1.5R
This ProLine Planishing Bottom Die is made from polished and hardened S7 tool steel, with a 1-1/2 inch radius and 1-1/2 inch diameter face.
Product Details »
ProLine Planishing Hammer Bottom Die 1.5 x 3R
This ProLine Planishing Bottom Die is made from polished and hardened S7 tool steel, with a 3 inch radius and 1-1/2 inch diameter face.
Product Details »
ProLine Planishing Hammer Bottom Die 1.5 x 6R
This ProLine Planishing Bottom Die is made from polished and hardened S7 tool steel, with a 6 inch radius and 1-1/2 inch diameter face.
Product Details »
ProLine Planishing Hammer Bottom Die 1.5 x 2R
This ProLine Planishing Bottom Die is made from polished and hardened S7 tool steel, with a 2 inch radius and 1-1/2 inch diameter face.
Product Details »
ProLine Planishing Hammer Bottom Die 1.5 x 4R
This ProLine Planishing Bottom Die is made from polished and hardened S7 tool steel, with a 4 inch radius and 1-1/2 inch diameter face.
Product Details »
ProLine Planishing Hammer Bottom Die 1.5 x 0R
This ProLine Planishing Bottom Die is made from polished and hardened S7 tool steel, with a flat 1-1/2 inch diameter face.
Product Details »
ProLine Planishing Hammer Bottom Die 1.5 x 24R
This ProLine Planishing Bottom Die is made from polished and hardened S7 tool steel, with a 24 inch radius and 1-1/2 inch diameter face.
Product Details »
Baileigh Power Hammer 1.5 inch Radius Lower Die, 2.0 OD
This Baileigh power hammer lower die features a 1.5 inch radius and a 2 inch outside diameter
Product Details »
ProLine Planishing Hammer Bottom Die 1.5 x 5R
This ProLine Planishing Bottom Die is made from polished and hardened S7 tool steel, with a 5 inch radius and 1-1/2 inch diameter face.
Product Details »
Pro-Tools HB302 Bender Die 1.5 inch NPS (1.900 OD) x 5 inch CLR, 90 degrees
…measured from the center rotation point of the die to the middle of the tubing. Max Degree of Bend - Dies can be purchased to bend up to 90 degrees…
Product Details »
1.5 inch Radius Lower Die for Mechammer
1.5 inch Radius Lower Planishing Die for Mechammer
Product Details »
ProLine Planishing Hammer Bottom Die 1.5 x 1R
This ProLine Planishing Bottom Die is made from polished and hardened S7 tool steel, with a 1 inch radius and 1-1/2 inch diameter face.
Product Details »
Pro-Tools HB302 Bender Die 1.5 inch NPS (1.900 OD) x 6 inch CLR, 90 degrees
…measured from the center rotation point of the die to the middle of the tubing. Max Degree of Bend - Dies can be purchased to bend up to 90 degrees…
Product Details »
Pro-Tools HB302 Bender Die 1.5 inch NPS (1.900 OD) x 7 inch CLR, 90 degrees
…measured from the center rotation point of the die to the middle of the tubing. Max Degree of Bend - Dies can be purchased to bend up to 90 degrees…
Product Details »
LAZZE 1.5mm Radius Die Set for Mittler Bros. Bead Roller
…die set is made in the USA from high quality tool steel to fit the Mittler Bros. 3/4 inch shafts. Use the 1.5mm radius die set to create a 1.5mm bead…
Product Details »
Baileigh Bender Die, 1/2 inch OD x 1.5 inch CLR, 180 degrees
…measured from the center rotation point of the die to the middle of the tubing. Max Degree of Bend - Dies can be purchased to bend up to 90 degrees or…
Product Details »
JS Tools 1.5mm Half-U Bead Roll Die - Single Roll
This 1.5mm radius Half-U Roll is made for JS Tools Bead Rollers but works with other machines with 20mm shafts and 2 inch shaft center to center…
Product Details »
JS Tools 1.5mm Radius Bead Roll Die Set
This 1.5mm Radius Bead Roll Set is made for JS Tools Bead Rollers but works with other machines with 20mm shafts and 2 inch shaft center to center…
Product Details »
Pro-Tools MB105 Replacement U-Strap, 1.5 inch Square
Replacement 1.5 inch square U-Strap for Pro-Tools die sets.
Product Details »
Van Sant Enterprises, Inc.
- 75 Truman Road
- Pella, IA 50219
- Map & Directions
- Toll Free: 877-826-7268
- Phone: 641-628-3860
- E-mail: [email protected]
- Business Hours: Mon-Fri 8am - 5pm CST
Connect with Us
Terms & Conditions | Privacy Policy | Sitemap
