In-stock orders placed before 3 pm Central Time ship same day! Click here for details →
Flange
- Products (115)
- Youtube (20)
- Facebook (14)
Categories
Tennsmith Corner Notcher, 16 gauge
…piercing and knockout operations. This notcher can be configured with flange blades for forming reinforced corners in boxes, pans, and chassis…
Product Details »
Huth 1673 Portable Expander/Swager
…Swager/Expander equips you to form ball joints, slip joints, flares and flanges, and perform doming and reducing anywhere in your shop. This tubing…
Product Details »Sale Price: $8213.23
Mechammer Mark II Planishing Hammer Deluxe Kit
…tipping, flanging, and more! Other features include a 22-inch throat depth, variable speed operation up to 3000 beats per minute, and a flanging arm…
Product Details »Sale Price: $11495.00
2 inch Mittler Bros. Dimple Die
…dies are used to improve the strength and appearance of a panel and will flange (or flare) an existing hole in sheet metal up to .125 inch thick 4130…
Product Details »
MetalAce Straight T-Dolly - Small
…aluminum parts, our MetalAce Small Straight T-Dolly is used to form flanges and edges by hammering (with hammer or slapper) the metal over a rounded…
Product Details »
Mittler Bros. 3/8 inch Flange Roll - Keyed
Creates 3/8 inch flange in sheet metal. All bead rolls are made from heat treated tool steel for a lifetime of quality service.
Product Details »
Baileigh MH-19 Power Hammer
…but some popular applications are thumbnail shrinking, stretching, flanging, beading, offsetting, and louvers. The spring mode allows the dies to…
Product Details »Sale Price: $29999.00
Roper Whitney Style L Flanging Roll Set
Creates a Flange in sheet metal on Roper Whitney 622 Machines. Upper and Lower Roll Set. Designed for use on 22 ga steel.
Product Details »
MetalAce 2 inch Width, 1.00 inch Radius Offset Anvil
…Wheel, 28F Imperial, or on all other models with the optional anvil yoke. Offset dies are great when working up close to a flange or obstruction.
Product Details »
Baileigh MH-37HD Power Hammer
…but some popular applications are thumbnail shrinking, stretching, flanging, beading, offsetting, and louvers. The spring mode allows the dies to…
Product Details »Sale Price: $81299.00
ProLine Tapered T-Dolly - Medium
…quality tools, built in the USA, ProLine Tapered T-Dollies can form flanges and edges by hammering (with hammer or slapper) the metal over the rounded…
Product Details »
Icengineworks 1-7/8 inch Block Adapter
…Block Adapters are used to start modeling by creating a connection point between the header flange or 1-7/8 inch exhaust tube and the modeling block.
Product Details »
ProLine Tapered T-Dolly - Large
…quality tools, built in the USA, ProLine Tapered T-Dollies can form flanges and edges by hammering (with hammer or slapper) the metal over the rounded…
Product Details »
Roper Whitney No. 12 Medium Duty Portable Punch
…deep x 2-1/8 inch high throat allows for punching angles, channels, flanges, and roofing purlins. Options include a ratchet handle to operate the…
Product Details »
Roper Whitney No. 24 Heavy Duty Bench Punch
…24 Bench Punch is specifically designed to punch angles, channels, and flanged parts. Recommended for 10 gauge and thicker material, the No. 24 uses…
Product Details »
Flange Kit for Scotch-brite Wheels on Multitool Motors
Flange Kit for Scotch-brite Wheels on Multitool Motors
Product Details »
Huth Flanger, 1-1/2 - 3 inch
…3 inch material. It works in the Huth Swager Box and can be reversed for a flat flange. Requires 815-HTH or 820-HTH to adapt to the swaging cylinder.
Product Details »
3/4 inch Mittler Bros. Dimple Die
…dies are used to improve the strength and appearance of a panel and will flange (or flare) an existing hole in sheet metal up to .125 inch thick 4130…
Product Details »
Mittler Bros. Dimple Die Set, 1/2 to 2 inch (4 piece)
…dies are used to improve the strength and appearance of a panel and will flange (or flare) an existing hole in sheet metal up to .125 inch thick 4130…
Product Details »Sale Price: $370.00
Tipping Die Set for Mechammer
…of the flange and each ring is reversible to offer two flange radius options. The included tool holders have a built-in fence for consistent flange…
Product Details »
Mittler Bros. Heavy Duty Hand-Held Shrinker/Stretcher
…adjustments along an edge, or perhaps there isn't enough clearance near a flange to use a shrinker mounted on a stationary base. Of course, it also…
Product Details »
Siegmund Imperial 16 V-Prism Extension
This screw-in flange is used primarily with V-prisms, allowing them to be inserted onto the table, using the tables bore holes. Siegmund fixtures are…
Product Details »
MetalAce Straight T-Dolly - Medium
…aluminum parts, our MetalAce Medium Straight T-Dolly is used to form flanges and edges by hammering (with hammer or slapper) the metal over a rounded…
Product Details »
1-1/4 inch Mittler Bros. Dimple Die
…dies are used to improve the strength and appearance of a panel and will flange (or flare) an existing hole in sheet metal up to .125 inch thick 4130…
Product Details »
Van Sant Enterprises, Inc.
- 75 Truman Road
- Pella, IA 50219
- Map & Directions
- Toll Free: 877-826-7268
- Phone: 641-628-3860
- E-mail: [email protected]
- Business Hours: Mon-Fri 8am - 5pm CST
Connect with Us
Terms & Conditions | Privacy Policy | Sitemap
