In-stock orders placed before 3 pm Central Time ship same day! Click here for details →
Flange
- Products (115)
- Youtube (20)
- Facebook (14)
Categories
Bi-Metal Segment Saw Blade
…features bi-metal teeth for long service life and a recessed mounting flange for cutting flush with the work surface. Works for sheet metal up to…
Product Details »
8 inch OD Contact Wheel for RadiusMaster Grinder
…on one face and has a flange with a height of approximately 1.66 inches on the other. Older machines will have two flanges with heights around 0.6…
Product Details »
1 inch Mittler Bros. Dimple Die
…dies are used to improve the strength and appearance of a panel and will flange (or flare) an existing hole in sheet metal up to .125 inch thick 4130…
Product Details »
1-1/4 inch Mittler Bros. Dimple Die
…dies are used to improve the strength and appearance of a panel and will flange (or flare) an existing hole in sheet metal up to .125 inch thick 4130…
Product Details »
2-1/2 inch Mittler Bros. Dimple Die
…dies are used to improve the strength and appearance of a panel and will flange (or flare) an existing hole in sheet metal up to .125 inch thick 4130…
Product Details »
Siegmund System 28 Fixing Bolt, 15.5mm diameter
…the S2-280252 clamping plate when fitting flanges to pipe. Diameter listed corresponds to the flange hole diameter. Siegmund fixtures are designed…
Product Details »
Siegmund System 28 Fixing Bolt, 18.9mm diameter
…the S2-280252 clamping plate when fitting flanges to pipe. Diameter listed corresponds to the flange hole diameter. Siegmund fixtures are designed…
Product Details »
Siegmund System 28 Fixing Bolt, 28.2mm diameter
…the S2-280252 clamping plate when fitting flanges to pipe. Diameter listed corresponds to the flange hole diameter. Siegmund fixtures are designed…
Product Details »
Siegmund System 28 Clamping Plate, ANSI / ASME B 16.5 400 - 600 lbs
This Siegmund clamping plate is designed to hold pipe flanges in place for welding. For US standard ANSI / ASME B 16.5 400 - 600 lbs from 1/2 inch to…
Product Details »
Siegmund System 28 Clamping Plate, ANSI / ASME B 16.5 150 lbs.
This Siegmund clamping plate is designed to hold pipe flanges in place for welding. For US standard ANSI / ASME B 16.5 150 lbs from 1/2 inch to 8…
Product Details »
Siegmund System 28 Fixing Bolt, 13.8mm diameter
…and S2-280221-p clamping plates when fitting flanges to pipe. Diameter listed corresponds to the flange hole diameter. Siegmund fixtures are designed…
Product Details »
Siegmund System 28 Fixing Bolt, 17.8mm diameter
…and S2-280221-p clamping plates when fitting flanges to pipe. Diameter listed corresponds to the flange hole diameter. Siegmund fixtures are designed…
Product Details »
Siegmund System 28 Fixing Bolt, 29.8mm diameter
…and S2-280221-p clamping plates when fitting flanges to pipe. Diameter listed corresponds to the flange hole diameter. Siegmund fixtures are designed…
Product Details »
Tennsmith Corner Notcher, 16 gauge
…piercing and knockout operations. This notcher can be configured with flange blades for forming reinforced corners in boxes, pans, and chassis…
Product Details »
Mittler Bros. Dimple Die Set, 1/2 to 3 inch (6 piece)
…dies are used to improve the strength and appearance of a panel and will flange (or flare) an existing hole in sheet metal up to .125 inch thick 4130…
Product Details »Sale Price: $745.00
ProLine Tapered T-Dolly - Large
…quality tools, built in the USA, ProLine Tapered T-Dollies can form flanges and edges by hammering (with hammer or slapper) the metal over the rounded…
Product Details »
ProLine Tapered T-Dolly - Medium
…quality tools, built in the USA, ProLine Tapered T-Dollies can form flanges and edges by hammering (with hammer or slapper) the metal over the rounded…
Product Details »
ProLine Tapered T-Dolly - Small
…quality tools, built in the USA, ProLine Tapered T-Dollies can form flanges and edges by hammering (with hammer or slapper) the metal over the rounded…
Product Details »
ProLine Tapered T-Dolly - Set of 3
…quality tools, built in the USA, ProLine Tapered T-Dollies can form flanges and edges by hammering (with hammer or slapper) the metal over the rounded…
Product Details »Sale Price: $279.00
MetalAce Straight T-Dolly - Small
…aluminum parts, our MetalAce Small Straight T-Dolly is used to form flanges and edges by hammering (with hammer or slapper) the metal over a rounded…
Product Details »
MetalAce Straight T-Dolly - Medium
…aluminum parts, our MetalAce Medium Straight T-Dolly is used to form flanges and edges by hammering (with hammer or slapper) the metal over a rounded…
Product Details »
MetalAce Straight T-Dolly - Large
…aluminum parts, our MetalAce Small Straight T-Dolly is used to form flanges and edges by hammering (with hammer or slapper) the metal over a rounded…
Product Details »
MetalAce Straight T-Dolly - Set of 3
…or aluminum parts, our MetalAce Straight T-Dollies are used to form flanges and edges by hammering (with hammer or slapper) the metal over a rounded…
Product Details »Sale Price: $119.00
Roper Whitney XX Deep Throat Hand Punch Kit
…large throat gives you the opportunity to punch into panels with a flanged edge. The XX Hand Punch includes a variety punch and die sets , giving…
Product Details »
Van Sant Enterprises, Inc.
- 75 Truman Road
- Pella, IA 50219
- Map & Directions
- Toll Free: 877-826-7268
- Phone: 641-628-3860
- E-mail: [email protected]
- Business Hours: Mon-Fri 8am - 5pm CST
Connect with Us
Terms & Conditions | Privacy Policy | Sitemap
