In-stock orders placed before 3 pm Central Time ship same day! Click here for details →
Hole
- Products (1567)
- Youtube (121)
- Facebook (60)
Categories
Shop By BRAND
Roper Whitney No. 218 Bench Punch
…No. 218 boasts the largest throat depth in the Roper Whitney lineup at 12-1/4 inches and can punch up to a 2-inch round hole with the proper adapters.
Product Details »
Electric Pipe Threader Adapter for Hulk Roll Bender
…Machinery Portable Pipe Threader turning it into a powered unit. This adapter has a 20mm hole to fit both the Hulk or Harbor Freight drive shafts.
Product Details »
Slugger Truck Frame Cutters - ALL PRODUCTS
…arbor. Slugger Cutters reduce torque and horsepower requirements dramatically by only cutting the outside of the hole and ejecting the center slug.
Product Details »
BuildPro Stop/Riser Kit - 1 to 2 inch OD
…1-3/4, and 2 inch OD x 2 inch tall stop. Each stop features a 5/8 inch hole for stacking or use with other clamps and v-blocks when additional height…
Product Details »Sale Price: $95.00
BuildPro 16mm Stop/Riser Kit - 25 to 50mm OD
…25, 30, 40, 45, and 50mm OD x 50mm tall stop. Each stop features a 16mm hole for stacking or use with other clamps and v-blocks when additional height…
Product Details »Sale Price: $95.00
Slugger Sheet Metal Cutter, 5/16 inch
These Slugger Small Hole Cutters are commonly used as spot weld cutters when removing welded on body panels during a restoration or repair. You will…
Product Details »
Slugger Sheet Metal Cutter, 3/8 inch
These Slugger Small Hole Cutters are commonly used as spot weld cutters when removing welded on body panels during a restoration or repair. You will…
Product Details »
Slugger Sheet Metal Cutter, 7/16 inch
These Slugger Small Hole Cutters are commonly used as spot weld cutters when removing welded on body panels during a restoration or repair. You will…
Product Details »
Slugger Sheet Metal Cutter, 1/2 inch
These Slugger Small Hole Cutters are commonly used as spot weld cutters when removing welded on body panels during a restoration or repair. You will…
Product Details »
Slugger Sheet Metal Cutter, 9/16 inch
These Slugger Small Hole Cutters are commonly used as spot weld cutters when removing welded on body panels during a restoration or repair. You will…
Product Details »
Slugger Sheet Metal Cutter, 5/8 inch
These Slugger Small Hole Cutters are commonly used as spot weld cutters when removing welded on body panels during a restoration or repair. You will…
Product Details »
Slugger Sheet Metal Cutter, 11/16 inch
These Slugger Small Hole Cutters are commonly used as spot weld cutters when removing welded on body panels during a restoration or repair. You will…
Product Details »
Slugger Sheet Metal Cutter, 3/4 inch
These Slugger Small Hole Cutters are commonly used as spot weld cutters when removing welded on body panels during a restoration or repair. You will…
Product Details »
Slugger Sheet Metal Cutter, 13/16 inch
These Slugger Small Hole Cutters are commonly used as spot weld cutters when removing welded on body panels during a restoration or repair. You will…
Product Details »
Auto Adjust Toggle Clamp with Stand, Rubber Foot, Tall
…inserted to any depth, provided there is enough frame clearance under that hole in the table. See our clamps equipped with short stands for limited…
Product Details »
Auto Adjust Toggle Clamp with Stand, Steel Foot, Tall
…inserted to any depth, provided there is enough frame clearance under that hole in the table. See our clamps equipped with short stands for limited…
Product Details »
Auto Adjust Toggle Clamp with Stand, Steel Finger, Tall
…inserted to any depth, provided there is enough frame clearance under that hole in the table. See our clamps equipped with short stands for limited…
Product Details »
SHAVIV F12 Countersink Blade (up to 0.5 inch)
The Shaviv F12 Countersink for chamfering round holes up to .5 inch (12mm) diameter.
Product Details »
SHAVIV F20 Countersink Blade (up to 0.8 inch)
The Shaviv F20 Countersink for chamfering round holes up to .78 inch (20mm) diameter.
Product Details »
SHAVIV F30 Countersink Blade (up to 1.18 inch)
The Shaviv F30 Countersink for chamfering round holes up to 1.18 inch (30mm) diameter.
Product Details »
Delrin Counter Die for Pro-Tools 105, 1-1/2 OD
…corresponding die set you will be required to drill your own 7/8 inch pin hole in the proper location. You can use an existing steel die for a…
Product Details »
Delrin Counter Die for Pro-Tools 105, 3/4 OD
…corresponding die set you will be required to drill your own 7/8 inch pin hole in the proper location. You can use an existing steel die for a…
Product Details »
Delrin Counter Die for Pro-Tools 105, 3/4 NPS
…corresponding die set you will be required to drill your own 7/8 inch pin hole in the proper location. You can use an existing steel die for a…
Product Details »
Delrin Counter Die for Pro-Tools 105, 1 inch NPS
…corresponding die set you will be required to drill your own 7/8 inch pin hole in the proper location. You can use an existing steel die for a…
Product Details »
Van Sant Enterprises, Inc.
- 75 Truman Road
- Pella, IA 50219
- Map & Directions
- Toll Free: 877-826-7268
- Phone: 641-628-3860
- E-mail: [email protected]
- Business Hours: Mon-Fri 8am - 5pm CST
Connect with Us
Terms & Conditions | Privacy Policy | Sitemap
