In-stock orders placed before 3 pm Central Time ship same day! Click here for details →

Notch and Bend Aligner with SmartTool

Part #: 1800-STA
Ships From: Factory shipped

Lead Time: Usually ships within 2-4 days

We want to give you the best information possible regarding your order at Trick-Tools and product availability is very important to us. This information reflects our best estimate of the shipping time for your order on a product by product basis. Items in stock at our warehouse typically ship same day if the order is placed before 3pm Central Time.

Availability on Items shipped directly from the factory is an estimate for that product based on averages from our experience. Items marked "Call for availability" have limited stock or unpredictable lead times and require a phone call to get a lead time estimate. We apologize but we are unable to guarantee lead times on factory-shipped items.

Price: $235.00

Up to 1/10 degree accuracy
Fits 3/4 to 2 inch OD
Simple 2 minute re-calibration
Battery (9 volt) lasts about 400 hours of use

SHIPPING:

BRAND:

DESCRIPTION

This combo will help you to track rotation of a tube while bending, notching, or welding. Accurate to one tenth of a degree, the Digital SmartTool runs for about 400 hours on a single 9 volt battery, has an automatic shut off after 6 minutes, and a low battery indicator. Displays degrees, slope % and pitch (in/ft) with arrows to show the direction to move towards level. Simple two minute recalibration and hold feature locks the reading on the display. Display rotates upside down with level and audible indicator beeps when you reach level.

SPECIFICATIONS

•Range: 0-360 degrees
•Resolution: 1/10 degree
•Accuracy: 1/10 degree at 0.0° & 90.0°, 0.2° all other angles
•Capacity: 3/4 - 2 inch OD