In-stock orders placed before 3 pm Central Time ship same day! Click here for details →
Flat Die
- Products (77)
- Youtube (7)
Categories
Shop By BRAND
JS Tools Wide Flat Bead Roll Die - Single Roll
Lower Wide Flat Bead Roll Set for JS Tools Bead Rollers. Works with other machines with 20mm shafts and 2 inch shaft center to center distance.…
Product Details »
JS Tools 7mm Flat Bead Roll Die Set
This 7mm Flat Bead Roll Set is made for JS Tools Bead Rollers but works with other machines with 20mm shafts and 2 inch shaft center to center…
Product Details »
Mittler Bros. No. 10 Finish Washer Dimple Die
…sheet metal, these Mittler Bros. finish washer dimple dies are great when using a #10 flat head screw. Rated for up to .049 mild steel or .063…
Product Details »
LAZZE U Profile Die Set for Mittler Bros. Bead Roller
…designed die set is made in the USA from high quality tool steel to fit the Mittler Bros. 3/4 inch shafts. Use the U Profile die set to create a flat…
Product Details »
JS Tools Tipping Bead Roll Die - Single Roll
…used to create a flange or lip in your material in conjunction with a flat lower roll. It is made for JS Tools Bead Rollers but works with other…
Product Details »
LAZZE Special Ford 33-34 Die Set for Mittler Bros. Bead Roller
…the Mittler Bros. 3/4 inch shafts. Use the Special Ford 33-34 die set to create a rounded flat bead commonly used in the restoration of 33-34 Fords.
Product Details »
LAZZE Flat Die Set for Mittler Bros. Bead Roller
…LAZZE designed die set is made in the USA from high quality tool steel to fit the Mittler Bros. 3/4 inch shafts. Use the Flat die to smooth out…
Product Details »
JS Tools Narrow Flat Bead Roll Die Set
Flat Bead Roll Set for JS Tools Bead Rollers. Works with other machines with 20mm shafts and 2 inch shaft center to center distance. Recessed…
Product Details »
Hulk Bender Adjustable Rolls, Up to 3 inch Wide Flat Stock, Easy Way
…rolls will provide a lifetime of quality service. These dies can roll up to 2-1/2 inch flat bar with the adjustable collar and 3 inch with the collar…
Product Details »
Baileigh Power Hammer Master Flat Top Die, 2.0 OD
This large 2 inch outside diameter master flat top die is made from S7 tool steel and fits the MH-19 and PH-28HD Baileigh Power Hammers.
Product Details »
ProLine Planishing Hammer Top Die 1-1/2 Flat Face Round
This ProLine Planishing Hammer Top Die is made from polished and hardened S7 tool steel, with a round flat face design measuring 1-1/2 inch diameter.
Product Details »
Huth 3-1/2 inch Radius Die, Flat Stock
…springback. Dies marked Full can bend up to 180 degrees but will need to be relieved to remove from die. Wrinkle Dies - Wrinkle dies provide a…
Product Details »
Mittler Bros. Power Hammer Flat Upper Die
…58-62 Rockwell, this flat die for the Mittler Bros. power hammer is used as the top die along with one of the bottom radius dies. See accessories tab…
Product Details »
Eckold SW4T Beak-Shaped Stretching Jaws
These high quality Eckold SW2S Beak-Shaped stretching dies for flat or U-profiles are built in Switzerland and have a 9 gauge (4.0mm) mild steel…
Product Details »
Tipping Die Set for Mechammer
This set allows you to rapidly form flanges on flat material with curved or straight edges. This kit includes upper and lower tool holders, as well as…
Product Details »
Eckold PFW40K Doming Tool - 40mm
These high-quality Eckold PFW40K doming dies are built in Switzerland and have a 16 gauge (1.5mm) mild steel capacity or .059 inch (1.5mm) aluminum…
Product Details »
Huth Bender Die Set, 3.5 inch Flat Stock x 3 inch CLR
…measured from the center rotation point of the die to the middle of the tubing. Max Degree of Bend - Dies can bend up to the specified angle depending…
Product Details »
JS Tools 6mm Flat Bead Roll Die Set
This 6mm Flat Bead Roll Set is made for JS Tools Bead Rollers but works with other machines with 20mm shafts and 2 inch shaft center to center…
Product Details »
Mittler Bros. 1/4 inch Finish Washer Dimple Die
…sheet metal, these Mittler Bros. finish washer dimple dies are great when using a 1/4 inch flat head screw. Rated for up to .049 mild steel or .063…
Product Details »
JS Tools 5mm Flat Bead Roll Die Set
This 5mm Flat Bead Roll Set is made for JS Tools Bead Rollers but works with other machines with 20mm shafts and 2 inch shaft center to center…
Product Details »
Upper Die Set with Soft Insert for Mechammer
This upper die set includes two uppers for Mechammer, one flat and one for reverse curves. Each has a replaceable phenolic insert for non marring of…
Product Details »
JS Tools 2mm Radius Bead Roll Die Set, Flat Style
This 2mm Radius Bead Roll Set is made for JS Tools Bead Rollers but works with other machines with 20mm shafts and 2 inch shaft center to center…
Product Details »
METALpro XP 45 ton Ironworker
…with METALpro’s 3-in-1 combination shear which consists of an 8-inch flat bar shear, 4-inch angle iron shear, and round/square rod shear built into…
Product Details »Sale Price: $12540.00
Fein BLK 1.3CSE Sheet Metal Nibbler, 18 gauge
…Fein BLK 1.3CSE nibbler is the perfect compact power tool for cutting flat sheet metal, corrugated sheet metal, and profiles. Its slim design makes…
Product Details »Sale Price: $754.95
Van Sant Enterprises, Inc.
- 75 Truman Road
- Pella, IA 50219
- Map & Directions
- Toll Free: 877-826-7268
- Phone: 641-628-3860
- E-mail: [email protected]
- Business Hours: Mon-Fri 8am - 5pm CST
Connect with Us
Terms & Conditions | Privacy Policy | Sitemap
