Punch

Roper Whitney No. 218 Bench Punch

…Roper Whitney No. 218 Bench Punch is great for prototyping or the job shop making small production runs. This punch features an adjustable die shoe…

Roper Whitney No. 134 Hydraulic Punch Press

…134 hydraulic punch upgrades your production capabilities with a large 24-inch throat depth and fast punching speeds. This punch has a control system…

Edwards Punch & Dies - ALL PRODUCTS

These punch and die sets fit Edwards Ironworkers. Many sizes and shapes are available. Click the button below to see the full list.

Roper Whitney 5 Jr Hand Punch Kit

…original Roper Whitney No. 5 Jr. Hand Punch Kit is a compact, heavy-duty solution for fast, accurate hole punching in sheet metal and other materials.…

Mittler Bros. 2-5/8 inch Gauge Hole Punch

This Gauge Hole Punch can be used with a Mittler Bros. Bench Press or by tightening the supplied bolt with a common wrench or ratchet. Good for up to…

Mittler Bros. 2-1/16 inch Gauge Hole Punch

This Gauge Hole Punch can be used with a Mittler Bros. Bench Press or by tightening the supplied bolt with a common wrench or ratchet. Good for up to…

Mittler Bros. 2-1/4 inch Gauge Hole Punch

This Gauge Hole Punch can be used with a Mittler Bros. Bench Press or by tightening the supplied bolt with a common wrench or ratchet. Good for up to…

Mittler Bros. 3-3/8 inch Gauge Hole Punch

This Gauge Hole Punch can be used with a Mittler Bros. Bench Press or by tightening the supplied bolt with a common wrench or ratchet. Good for up to…

Mittler Bros. 3-1/8 inch Gauge Hole Punch

This Gauge Hole Punch can be used with a Mittler Bros. Bench Press or by tightening the supplied bolt with a common wrench or ratchet. Good for up to…

Spring Tools High Speed Steel Center Punch

…technology and makes center punching a breeze with no additional tools needed. The High Speed Steel Center Punch is designed to mark hardened…

Urethane Punch Stripper for Scotchman 12012-24M

Punch Station Slug Receptacle for Edwards Ironworkers

Catch slugs in one convenient spot before they hit the ground with the Slug Receptacle for Edwards 40 - 60 ton ironworkers.

Punch-Life Punching Lubricant

…most out of your punches and dies with Punch-Life punching lubricant. This lubricant will improve performance, increase punch life, reduce stripping…

1/4 x 3/8 inch Oblong Punch and Die for Punch-Pro 76000PR

This punch and die set fit the Hougen-Ogura Punch-Pro 76000PR 18v cordless punch and is rated to punch up to 1/4 inch thick mild steel.

1/4 x 1/2 inch Oblong Punch and Die for Punch-Pro 76000PR

This punch and die set fit the Hougen-Ogura Punch-Pro 76000PR 18v cordless punch and is rated to punch up to 1/4 inch thick mild steel.

11/32 x 1/2 inch Oblong Punch and Die for Punch-Pro 76000PR

This punch and die set fit the Hougen-Ogura Punch-Pro 76000PR 18v cordless punch and is rated to punch up to 1/4 inch thick mild steel.

23/64 x 17/32 inch Oblong Punch and Die for Punch-Pro 76000PR

This punch and die set fit the Hougen-Ogura Punch-Pro 76000PR 18v cordless punch and is rated to punch up to 1/4 inch thick mild steel.

3/8 x 19/32 inch Oblong Punch and Die for Punch-Pro 76000PR

This punch and die set fit the Hougen-Ogura Punch-Pro 76000PR 18v cordless punch and is rated to punch up to 1/4 inch thick mild steel.

7/16 x 5/8 inch Oblong Punch and Die for Punch-Pro 76000PR

This punch and die set fit the Hougen-Ogura Punch-Pro 76000PR 18v cordless punch and is rated to punch up to 1/4 inch thick mild steel.

7/16 x 5/8 inch Oblong Punch and Die for Punch-Pro 75006PR

This punch and die set will fit the Hougen-Ogura Punch-Pro 75006PR portable punch. Different die options are available for varying thickness material…

1/2 x 3/4 inch Oblong Punch and Die for Punch-Pro 75006PR

This punch and die set will fit the Hougen-Ogura Punch-Pro 75006PR portable punch. Different die options are available for varying thickness material…

9/16 x 13/16 inch Oblong Punch and Die for Punch-Pro 75006PR

This punch and die set will fit the Hougen-Ogura Punch-Pro 75006PR portable punch. Different die options are available for varying thickness material…

11/16 x 13/16 inch Oblong Punch and Die for Punch-Pro 75006PR

This punch and die set will fit the Hougen-Ogura Punch-Pro 75006PR portable punch. Different die options are available for varying thickness material…

1/4 x 3/8 inch Oblong Punch and Die for Punch-Pro 75002.5PR

This punch and die set will fit the Hougen-Ogura Punch-Pro 75002.5PR portable punch. Different die options are available for varying material…