In-stock orders placed before 3 pm Central Time ship same day! Click here for details →

Ercolina Bender Nominal Pipe Dies

These dies fit the Ercolina Tube Bender and can be used to bend the specified size in mild steel, stainless steel, and more.

Material Size - refers to the Nominal Pipe Size (Outside Diameter of the tube as measured with a caliper is noted in parenthesis)
CLR - stands for Center Line Radius, meaning the bend radius as measured from the center rotation point of the die to the middle of the tubing. (see image)
Minimum Wall - denotes the minimum recommended wall thickness for consistent high quality wrinkle free bends at the specified radius.
Maximum Wall - click on individual die part number for specific info
Max Degree of Bend - Dies can bend up to a full U-bend of 180 degrees after springback.

**Counterbending die support 050E required when bending radii 225mm and larger. (Not required for TB100/TB130/TB180)

Filter Selection »

Narrow by Sub Category

Searching...

See All Products

Sort by:

Click on the Part Number in the chart below to get item specifics and lead time info.

Part Number	Material Size	Center Line Radius (CLR)	Minimum Wall Thickness	Max Degree of Bend	Most Common	Price
153R150P1250-set	1-1/4 NPS (1.660)	5.9 (150mm)	Schedule 5	180		Price: $1,670.00
153R190P1250-set	1-1/4 NPS (1.660)	7.5 (190mm)	Schedule 5	180		Price: $2,320.00
153R100P1500-set	1-1/2 NPS (1.900)	3.9 (100mm)	Schedule 40	180		Price: $1,340.00
153R130P1500-set	1-1/2 NPS (1.900)	5.1 (130mm)	Schedule 40	180		Price: $1,610.00
153R150P1500-set	1-1/2 NPS (1.900)	5.9 (150mm)	Schedule 40	180		Price: $1,670.00
153R170P1500-set	1-1/2 NPS (1.900)	6.7 (170mm)	Schedule 10	180		Price: $1,880.00
153R190P1500-set	1-1/2 NPS (1.900)	7.5 (190mm)	Schedule 5	180		Price: $2,320.00
153R130P2000-set	2 NPS (2.375)	5.1 (130mm)	Schedule 40	180		Price: $1,710.00
153R150P2000-set	2 NPS (2.375)	5.9 (150mm)	Schedule 10	180		Price: $1,770.00
153R190P2000-set	2 NPS (2.375)	7.5 (190mm)	Schedule 5	180		Price: $2,420.00