In-stock orders placed before 3 pm Central Time ship same day! Click here for details →
Die
- Products (4213)
- Youtube (137)
- Facebook (61)
Categories
Shop By BRAND
Mittler Bros. Power Hammer Flat Upper Die
…Rockwell, this flat die for the Mittler Bros. power hammer is used as the top die along with one of the bottom radius dies. See accessories tab for…
Product Details »
HammerFab Flat Recess Dimple Die Set
…of the dimple dies are as follows: #10 die = .800 inch OD 1/4 inch die = .950 inch OD 5/16 inch die = 1.190 inch OD 3/8 inch die = 1.480 inch OD…
Product Details »
Oblong Punch and Die with Urethane Stripper
Oblong Punch and Die with Urethane Stripper for Mittler Bros. Bench Press. Standard die clearance for 18-20 gauge mild steel or .060 aluminum. Please…
Product Details »
Hex Punch and Die with Urethane Stripper
Hex Punch and Die with Urethane Stripper for Mittler Bros. Bench Press. Standard die clearance for 18-20 gauge mild steel or .060 aluminum. Please…
Product Details »
Round Punch and Die with Urethane Stripper
Round Punch and Die with Urethane Stripper for Mittler Bros. Bench Presses. Standard die clearance for 18-20 gauge mild steel or .060 aluminum. Please…
Product Details »
Square Punch and Die with Urethane Stripper
Square Punch and Die with Urethane Stripper for Mittler Bros. Bench Press. Standard die clearance for 18-20 gauge mild steel or .060 aluminum. Please…
Product Details »
1.25 inch Radius Lower Die for Mechammer
1.25 inch Radius Lower Planishing Die for Mechammer
Product Details »
1.5 inch Radius Lower Die for Mechammer
1.5 inch Radius Lower Planishing Die for Mechammer
Product Details »
24 inch Radius Lower Die for Mechammer
24 inch Radius Lower Planishing Die for Mechammer
Product Details »
Mittler Bros. Power Hammer Stretching Die Set
…steel and hardened to 58-62 Rockwell, this stretching die set will fit the Mittler Bros. power hammer. See accessories tab for additional die sets.
Product Details »
ProLine Urethane Die Assembly - Handheld Hammer
This one piece rubber upper die is used to raise panels quickly with a high crown die or smoothly when using a flatter crown on the ProLine Portable…
Product Details »
Linear Stretching Die Set for Mechammer
This Linear Stretching Die Set is used with the Mechammer and includes two dies for medium and fast stretching. Dies are indexable in 45 degree…
Product Details »
Channel Die Block for Piranha P50 Ironworkers
…die holder allows for maximum clearance and can punch a hole in 3 to 6 inch standard weight channel. The Channel Die Block replaces the standard die…
Product Details »
Edwards Round Punch and Die Starter Kit
Edwards Punch and Die Starter Kit (8 sets from 3/16 to 1-1/16 inch)
Product Details »Sale Price: $505.99
Double Crown Die Set for Mechammer
Featuring four square dies, this Double Crown Die Set for Mechammer is great for shaping compound curves with varying radii. Each die set features a…
Product Details »
HammerFab Large Flat Recess Dimple Die Set
…dies are as follows: 7/16 inch die = Approximately 1.4 inches 1/2 inch die = Approximately 1.7 inches The overall outside diameter of the dimple dies…
Product Details »
Small, 22mm Die Set for Mechammer
…flattening flanges, these 22mm dies are life savers when working with tight areas. This set includes an upper and lower die, each with a flat surface.
Product Details »
Fein GSZ4-280EL Extended Reach Die Grinder
The Fein GSZ4-280EL Die Grinder is an extremely handy die grinder with a long reach for light grinding and polishing work. Comes with 1/4 inch collet…
Product Details »Sale Price: $519.00
1/2 inch Mittler Bros. Dimple Die
…These dies are made from case hardened tool steel and work great in a press or ironworker. The overall outside diameter of the 1/2 inch dimple die is…
Product Details »
3/4 inch Mittler Bros. Dimple Die
…These dies are made from case hardened tool steel and work great in a press or ironworker. The overall outside diameter of the 3/4 inch dimple die is…
Product Details »
1 inch Mittler Bros. Dimple Die
…These dies are made from case hardened tool steel and work great in a press or ironworker. The overall outside diameter of the 1 inch dimple die is…
Product Details »
1-3/4 inch Mittler Bros. Dimple Die
…These dies are made from case hardened tool steel and work great in a press or ironworker. The overall outside diameter of the 1-3/4 inch dimple die…
Product Details »
2 inch Mittler Bros. Dimple Die
…These dies are made from case hardened tool steel and work great in a press or ironworker. The overall outside diameter of the 2 inch dimple die is…
Product Details »
3 inch Mittler Bros. Dimple Die
…These dies are made from case hardened tool steel and work great in a press or ironworker. The overall outside diameter of the 3 inch dimple die is…
Product Details »
Van Sant Enterprises, Inc.
- 75 Truman Road
- Pella, IA 50219
- Map & Directions
- Toll Free: 877-826-7268
- Phone: 641-628-3860
- E-mail: [email protected]
- Business Hours: Mon-Fri 8am - 5pm CST
Connect with Us
Terms & Conditions | Privacy Policy | Sitemap
