JD2 Model 32 Manual Tubing Bender

The Model 32 tube and pipe bender is the latest design by JD Squared. Essentially a heavy duty version of the original Model 3. The JD2 Model 32 can bend from 1/2 to 2 inch x .120 inch wall tubing manually with little effort because of the compound leverage from the ratcheting arm and can be upgraded to hydraulic power at any time. With hydraulics the machine is capable of bending up to 2.5 inch OD material, including 2 inch .250 inch wall DOM. (For manual operation the Model 32 must be solidly attached to a fixture such as our Floor Pedestal). The die sets are equipped with replaceable alloy blocks.

Standard on every Model 32 is the die locking mechanism. As the die rotates while bending, the drive holes in the forming die pass under the lock pin. When the drive hole is below the lock pin it drops into the drive hole, and when pressure is removed from the bender the die's rotation is locked at that position. When bending resumes the ramp machined into the lock pin will automatically lift the pin out of the drive hole. Die sets sold separately.

Warranty:

1 year manufacturer's warranty

•Mild Steel Capacity (inches): 2 x .120 manually, 2-1/2 x .120 with hydraulics
•Round Chrome Moly Capacity (inches): 2 x .120
•Round Aluminum Capacity (inches): 2 x .120
•Nominal PIPE Capacity: 2 inch schedule 40
•Square Mild Steel Capacity (inches): 1-1/2 x .120
•Solid Bar Mild Steel Capacity (inches): 1
•Minimum OD (inches): 1/2
•Degrees Per Stroke: 50
•Bending Style: rotary draw
•Min Center Line Radius (inches): 2.25
•Max Center Line Radius (inches): 7.5
•Max Degree of Bend: 180
•Repeatability Control: degree scale
•Maximum OD (inches): 2-1/2 with hydraulics
•Weight (pounds): 70

User Manual