In-stock orders placed before 3 pm Central Time ship same day! Click here for details →
Hole Punch
- Products (175)
- Youtube (29)
- Facebook (14)
Categories
Shop By BRAND
Roper Whitney 4-in-1 Hand Tool
…gauge mild steel, bend 16 gauge mild steel to 90 degrees, punch up to a 1/2 inch hole through 11 gauge mild steel, and gives the bracket a 90 degree…
Product Details »
Edwards 25 ton Dual Station Accessory
…a stand-alone unit with the optional Porta Power. The punching station can punch 1-inch holes in 5/16 inch mild steel and the open station can accept…
Product Details »Sale Price: $7299.00
METALpro 45 ton Ironworker
…of pressure at the punch station and 22.5 tons at the central workstation. This allows the user to punch a 7/8 inch round hole through 1/2 inch mild…
Product Details »Sale Price: $6341.25
Piranha P50, 50 ton Ironworker
…to punch, shear, and cope at an affordable price. The P50 features a 50 ton punch station with a 5-inch throat depth that can punch a 13/16 inch hole…
Product Details »
METALpro 50 ton Ironworker
…of pressure at the punch station and 25 tons at the central workstation. This allows the user to punch a 15/16 inch round hole through 1/2 inch mild…
Product Details »Sale Price: $7433.75
Trick Tools Dzus Dimple Tool
…make your Dzus Buttons flush with your panels. Simply drill or punch a 3/8 inch hole, place half of the tool on each side of the panel and tighten the…
Product Details »
Fein Slugger JMU 137 PQW Magnetic Drill
…even if power is cut to the drill. This drill packs enough punch to drill a 1-3/8 inch hole 2 inches deep. Features of this drill include a 10-1/4…
Product Details »Sale Price: $2149.95
KnKut 29-piece Jobber Length Step Point Drill Bit Set, 1/16 to 1/2 inch
Eliminate the need to center punch or drill pilot holes with these innovative Step Point Drill Bits from KnKut. This design reduces heat to increase…
Product Details »Sale Price: $298.00
METALpro XP 45 ton Ironworker
…of pressure at the punch station and 28 tons at the central workstation. This allows the user to punch a 7/8 inch round hole through 1/2 mild steel…
Product Details »Sale Price: $12540.00
METALpro XP 50 ton Ironworker
…of pressure at the punch station and 28 tons at the central workstation. This allows the user to punch a 15/16 inch round hole through 1/2 mild steel…
Product Details »Sale Price: $13965.00
KnKut 8-piece Step Point Drill Bit Set with 1/2 inch Shank, 9/16 to 1 inch
Eliminate the need to center punch or drill multiple pilot holes with these innovative Step Point Drill Bits from KnKut. This design reduces heat to…
Product Details »Sale Price: $493.78
KnKut 4-piece Step Point Drill Bit Set with 1/2 inch Shank, 9/16 to 1 inch
Eliminate the need to center punch or drill multiple pilot holes with these innovative Step Point Drill Bits from KnKut. This design reduces heat to…
Product Details »Sale Price: $224.84
Hougen RotaCut Metric Set, 7 cutters (8mm to 20mm)
…drill bit or hole saw. This Metric Cutter Kit contains 7 cutters (8, 10, 12, 14, 16, 18, 20mm), extra pilots, 11088 arbor & center punch in a plastic…
Product Details »Sale Price: $92.32
Scotchman FI125, 125 ton Ironworker
…inch round rod, and 1-1/2 inch square rod. The punch station can punch a massive 1-1/2 inch hole through 1 inch thick plate, while the coper notcher…
Product Details »
Fein Slugger AJMU 137 18v Cordless Magnetic Drill, Bare Tool
…of mag drills from Fein. This drill still packs enough punch to drill a 1-3/8 inch hole, 2 inches deep. Features of this drill include a 10-1/4 inch…
Product Details »Sale Price: $2077.50
Fein Slugger AJMU 137 18v Cordless Magnetic Drill
…of mag drills from Fein. This drill still packs enough punch to drill a 1-3/8 inch hole, 2 inches deep. Features of this drill include a 10-1/4 inch…
Product Details »Sale Price: $2499.95
Hougen RotaCut Combo Set, 13 cutters (5/16 to 1-1/2 inch)
Hougen RotaCut Hole Cutters produce clean burr-free holes quickly in sheet metal & plate materials up to 1/2 inch thick. Make holes 3 times faster…
Product Details »Sale Price: $295.59
Fein Slugger JME Short Slugger II Magnetic Drill
…smaller holes. Capable of drilling 1-1/4 inch holes through 2 inches of steel and weighing only 23 lbs, this drill packs a lot of punch for its size!…
Product Details »Sale Price: $1049.95
Piranha P65, 65 ton Ironworker
…options) The powerful 65-ton punching station features an 8-inch throat depth and is capable of punching a 1-1/16 inch hole through 3/4 inch mild…
Product Details »
Versa-Mount Universal Floor Pedestal
…B1, B2, B3 throatless shears Beverly SS2 and SS3 slitting shears Roper Whitney 16 punch Roper Whitney 17 punch Lancaster shrinker and stretcher
Product Details »
Pipe Notcher Housing for 2-5/8 inch to 3-1/2 inch OD Tooling
…of presses or ironworkers and includes the additional die section holes for mounting tooling meant for notching oilfield pipe. Dies are available…
Product Details »
Pipe Notcher Housing for up to 2-1/2 inch OD Tooling
…of presses or ironworkers and includes the additional die section holes for mounting tooling meant for notching oilfield pipe. Dies are available…
Product Details »
Heavy Duty Gauging Table Kit for Edwards 40 - 100 ton
…standard holes. Moveable guide fences clamp down to the table surface with heavy duty hardware to direct your material to the exact punch location…
Product Details »Sale Price: $1484.00
Gauging Table Kit for Edwards 40 - 100 ton
…the guess work out of making precise, repeatable standard or oversized holes. The table bolts to late model standard or oversize Pedestal Die Tables…
Product Details »Sale Price: $384.99
Van Sant Enterprises, Inc.
- 75 Truman Road
- Pella, IA 50219
- Map & Directions
- Toll Free: 877-826-7268
- Phone: 641-628-3860
- E-mail: [email protected]
- Business Hours: Mon-Fri 8am - 5pm CST
Connect with Us
Terms & Conditions | Privacy Policy | Sitemap
